4WDFrenzy Posted February 2, 2005 Share Posted February 2, 2005 I have been looking and studying my pcv(positive crankcase ventilation) system and was wondering what would happen if I was to remove the valve covers, install extra fittings for mounting either vacuum lines or breathers, and using the existing(factory) fittings for connecting to the pcv valve( via vacuum hoses and a tee to combine the two and go to the pcv valve). I was thinking about this design so that everything would be a little more straight forward and for the simple fact thatit would be like conventional PCV systems. Does anyone see any potential problems with this design? Thanks in advance. Patrick Link to comment Share on other sites More sharing options...
4WDFrenzy Posted February 3, 2005 Author Share Posted February 3, 2005 I guess I'll just give it a shot and report what happens, good or bad. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now