pete Posted February 9, 2005 Share Posted February 9, 2005 I have just changed rotors and pads on 95 legacy L and I noticed a lot of iron filings clinging to the abs sensors at the wheels. It appears to be touching the notched wheel that the sensor is supposed to monitor. Could this be confusing the transfer clutches , causing torque bind? I cleaned them (a little) and it seemed to improve the condition. However , the problem is not always the same severity. I could be reading more into it than there is. I would like to here from anyone with an idea one way or an other. Pete a very nubie. Link to comment Share on other sites More sharing options...
SevenSisters Posted February 9, 2005 Share Posted February 9, 2005 The metal filings can give false abs signals and trigger the abs light. Sorry, I don't think it has anything to do with the transmission and torque bind. Do a search on torque bind and try the fluid replacement first. Good luck. Link to comment Share on other sites More sharing options...
pete Posted February 9, 2005 Author Share Posted February 9, 2005 The metal filings can give false abs signals and trigger the abs light. Sorry, I don't think it has anything to do with the transmission and torque bind. Do a search on torque bind and try the fluid replacement first. Good luck. Thanks for the reply. I think you are probably right, Pete Link to comment Share on other sites More sharing options...
Setright Posted February 10, 2005 Share Posted February 10, 2005 Well, the Trans ECU does use the ABS wheel speed sensors, so it might be related. Best to clean the sensor well. Link to comment Share on other sites More sharing options...
pete Posted February 11, 2005 Author Share Posted February 11, 2005 Thanks for the reply I will clean all four of them and see what happens. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now