Urban Coyote Posted February 9, 2005 Share Posted February 9, 2005 Hi All, Is there a difference between a drive belt and a timing belt? The drive belt was just replaced in my '97 Impreza Outback before I bought it. From my understanding timing belts have to be changed regularly on '97 models onward because of an interferance engine. Are these two belts one in the same or different? cuz if they're different I'm going to have to find out when the timing belt was last done.... Thanks, Urban Coyote Link to comment Share on other sites More sharing options...
Legacy777 Posted February 9, 2005 Share Posted February 9, 2005 normally.....drive belts typically refer to the alternator/ps belt & a/c belt. Those belts are different then the timing belt. Link to comment Share on other sites More sharing options...
Urban Coyote Posted February 9, 2005 Author Share Posted February 9, 2005 Ok, thanks! I've also been looking through the forum for more info on timing belts. Is it possible that a '97 doesn't have an interferance engine? How would you tell one way or another? Urban Coyote Link to comment Share on other sites More sharing options...
Legacy777 Posted February 10, 2005 Share Posted February 10, 2005 What size engine do you have? If it's a 2.5 liter, yes it's an interference engine. Link to comment Share on other sites More sharing options...
idosubaru Posted February 10, 2005 Share Posted February 10, 2005 i think you have an interference motor. i was told the 97 and up model 2.2 liters were interference motors. but pre-97 motors were not interference. i'd like to clarify that as well since i just bought a 97 OBS with 68,000! could be the original belt for both of us. Link to comment Share on other sites More sharing options...
DerFahrer Posted February 10, 2005 Share Posted February 10, 2005 It's my understanding that ALL 97-up Subaru engines are interference. Link to comment Share on other sites More sharing options...
Tiny Clark Posted February 10, 2005 Share Posted February 10, 2005 Timing belts are also called camshaft drive belts. You need to find out what belt was replaced. Link to comment Share on other sites More sharing options...
Urban Coyote Posted February 10, 2005 Author Share Posted February 10, 2005 Uhg, sorry about that, it's a 2.2L engine. Originally I thought a drive belt and timing belt were the same, but after a little more research on this board I came to doubt that that was the case. I knew that the dealer I bought the car from replaced the drive belt and after reading a maintenance schedule that mentioned drive and camshaft belts (but no timing belt) I was totally confused! Which belt was actually replaced on my car and what/where is the timing belt? I think I have it straight now….drive belt is the one you see when you open the hood and runs the water pump and altinater, and camshaft/timing belt is in the engine? Please bear with me….I’ve been trying to learn as much about cars and how they run as possible, but it’s definitely a learning curve! I can appreciate the saying “Don’t blow a gasket” now though *lol* Ok, so I did a bunch of calling around and found the Subaru dealer that serviced my car with it’s previous owner. Seems it went in for it’s 96000km servicing and had the timing/camshaft belt done…and since the dealer I bought it from did the drive belt I should be all set for a while Now that I have a great running and looking car I have to decide what fun things to do with it Urban Coyote Link to comment Share on other sites More sharing options...
unibrook Posted December 14, 2005 Share Posted December 14, 2005 Glad to hear the belts were changed on time. I hate when I buy a used car and the seller/dealer leaves me having to guess which items have been maintained or not. "uh, yeah, um, I think my ex-wife said she got that done......there um, might be some repair receipts in the glove box...." Crikey. So, to make the world a better place, I keep a spreadsheet of all work done on my car including mileage, date, cost, symptoms, yadda, yadda. And I hand the spreadsheet to the buyer when I sell my used car. Lemme tellya, if the buyer knows anything about cars, his eyes light up and he really appreciates the spreadsheet! Link to comment Share on other sites More sharing options...
fnlyfnd Posted December 14, 2005 Share Posted December 14, 2005 97+ are interference....60k intervals, although there is a 100k timing belt. The timing belt is not "in" the engine. It is behind the belts you can see, under the plastic cover. it is covered as to not get any debris in it, since it is very important. Link to comment Share on other sites More sharing options...
seattlelegacy Posted December 14, 2005 Share Posted December 14, 2005 it is covered as to not get any debris in it, since it is very important. hogwash. Link to comment Share on other sites More sharing options...
k88241 Posted December 22, 2005 Share Posted December 22, 2005 hogwash. I agree. I thought the 96- had the 60,000 interval and the 97+ had the 100,000 interval on the timing belts? Link to comment Share on other sites More sharing options...
dburton97128 Posted December 23, 2005 Share Posted December 23, 2005 97+ are interference....60k intervals, although there is a 100k timing belt. The timing belt is not "in" the engine. It is behind the belts you can see, under the plastic cover. it is covered as to not get any debris in it, since it is very important. I believe the EJ22 engine (2.2L going back to 1990 or so) is also interferance. I just changed one and I'm sure there was interference when I rotated the cam pully by hand. You don't want one of these to break on you. Link to comment Share on other sites More sharing options...
Legacy777 Posted December 25, 2005 Share Posted December 25, 2005 All the 2.2's up until about 96 are NON-interference. I can tell you with 100% certainty that the 90-94 legacies are non-interference. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now