DerFahrer Posted August 26, 2003 Share Posted August 26, 2003 How do you do it, pray tell? My XT will occasionally light up its CEL about 15 seconds after being started, stay on for about 15 seconds again, then go out. How do I pull codes, and where can I reference them? Link to comment Share on other sites More sharing options...
DerFahrer Posted August 26, 2003 Author Share Posted August 26, 2003 C'mon guys, I'm new to the old Subies, help me out here I bought a Haynes manual for the Subaru 1600 and 1800's last night, but its code-pulling method is quite vague to me, just like the Legacy Haynes is for that car... Link to comment Share on other sites More sharing options...
calebz Posted August 26, 2003 Share Posted August 26, 2003 Here Soob Codes There is also a how-to in the ultimate subaru repair manual, for which there is a link at the top left of each page Link to comment Share on other sites More sharing options...
DerFahrer Posted August 26, 2003 Author Share Posted August 26, 2003 Thank you, Caleb! Haven't ever been in the USRM Link to comment Share on other sites More sharing options...
Subi81 Posted August 26, 2003 Share Posted August 26, 2003 So what COLOR are the "read" connectors? and what COLOR are the "Test Mode" connectors? If this could be amended to the ecucodes page I think that a lot of confusion could be cleared up. Thanks Link to comment Share on other sites More sharing options...
Skip Posted August 26, 2003 Share Posted August 26, 2003 The XT ECU is under the rear parcel shelf, the read memory (black) connectors and test mode (green)are beside it Here is another good reading link http://www.troublecodes.net/Subaru/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now