dasbrat Posted February 9, 2005 Share Posted February 9, 2005 I have an 1981 Brat, just found some good lookin' 14" alloy Pug's on a 1979 junkyard sedan: First, will they fit or will the offset be too much? I did a search on USMB and couldn't find enough to clarify exactly what wheels, and tire sizes would fit on my 81 Brat without a lift, or at least doing some cutting? The fender cutting would be O.K., but also can't find enough info on a lift for Gen 1's. Thanks for a clarification on what size wheel and tire works with a Generation 1 Brat. Link to comment Share on other sites More sharing options...
carfreak85 Posted February 9, 2005 Share Posted February 9, 2005 There are no pre-fabbed lifts for any gen one car. Also, the gen ones rear control arm comes very close to the rear wheel/tire combo. I don't know if the 14" pugs will fit with stock pug tire size on there, but I guess you'll just have to test it out. Link to comment Share on other sites More sharing options...
MorganM Posted February 9, 2005 Share Posted February 9, 2005 Bolt one on and find out Even if you buy the rims and they have too much backspacing; you could turn them around right here on the USMB. Link to comment Share on other sites More sharing options...
dasbrat Posted February 9, 2005 Author Share Posted February 9, 2005 Bolt one on and find out Even if you buy the rims and they have too much backspacing; you could turn them around right here on the USMB. Still dealin' one the car at the JY, and I think carfreak85 may be right about the backspacing issue. I guess I can always use them on my 82 Brat Right? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now