mtnman38 Posted February 20, 2005 Share Posted February 20, 2005 ok got my ea81 out and ready to put the spare in. Re-sealed oil pump put new rear main and put in new front main. So here is my question . On the main crank pully there is a groove ( not narley but it can be felt) from the main seal in the metal. A new pulley is 110$ from subaru. They dont offer a speedy sleeve (subaru,westbay,napa) is there a specific clearance that I can get buy with ,with out leaks or some other solution? Or am I over engineering thanks LT Link to comment Share on other sites More sharing options...
bratsrus1 Posted February 20, 2005 Share Posted February 20, 2005 Hi This is Jerry, bring your front pully to Napa they should have a speedy sleeve to fit it. Then it will be like new again. Thanks Jerry Link to comment Share on other sites More sharing options...
mtnman38 Posted February 20, 2005 Author Share Posted February 20, 2005 Yea thats what I thought . The guy on the phone must be a tool ( not uncommon for napa) present company not included of course. Hey thanks jerry be talking to ya soon for a kit shes almost ready just waiting for 3x4 lift pk davis is sure hard to get a hold of I have been waiting for a lift for a few months still dont know how close it is to being done o well it will be worth it when shes don chasing toyota's off the trail Ha ha ha thanks again LT Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now