SubaRube Posted August 27, 2003 Share Posted August 27, 2003 Has anyone tried these out? They are supposedly NEW, not Remanufactured. Going for around $100. No core charge obviously. Link to comment Share on other sites More sharing options...
JWX Posted August 27, 2003 Share Posted August 27, 2003 you got a link? Link to comment Share on other sites More sharing options...
SubaRube Posted August 27, 2003 Author Share Posted August 27, 2003 Try these http://www.automotive-axles.com/ http://www.gck.com/ I'm hoping someone has tried these before. Looks promising. Link to comment Share on other sites More sharing options...
Ratty2Austin Posted August 28, 2003 Share Posted August 28, 2003 if those are the "new" ones Schucks carried for a short time, then I have tried them out... I bought one and used it for less than a week till it completely destroyed itself, when I was trying to turn my car around the DOJ came apart, and the axle came apart and fell out of the cup!!! so I took it back and got a re-man.. which lasted untill ... probably still, I dont think it has broken yet (you would have to ask the guy that has it now!! ) i wouldnt waste my money on those again.. but thats just me! Austin Link to comment Share on other sites More sharing options...
stephenw22 Posted August 28, 2003 Share Posted August 28, 2003 So far, my "half-new" axles seem to be working well. They're made by Mevotech ( http://www.mevotech.com ). They have rebuilt inboard joints, and new outer joints that Mevotech actually designed themselves to be stronger and function better than the OEM design. They do a similar thing for Honda axles, which I have heard are notorious for being crap. I picked mine up from Auto Parts Plus (in Canada). They list for CAD$165 + $75 core, per axle. However, if you know the parts guys, they might give you jobber prices (CAD$100 + $75 core). Link to comment Share on other sites More sharing options...
SubaRube Posted August 28, 2003 Author Share Posted August 28, 2003 That sounds pretty bad Ratty2. Definitely not worth my time. Which re-man did you get from Schuck's? A1 Cardone , CCT, or the Beck/Arnley? I don't think anyone outside of Canada carries Mevotech from what I gather. Anyone know? Link to comment Share on other sites More sharing options...
shanonsf Posted August 28, 2003 Share Posted August 28, 2003 hey SubaRube, I noticed your in the Bay Area, then make a trip up to Albany Driveline (in Albany). they make a quality rebuild along with custom 4wd stuff with a quarantee nice folks too. There into rock crawling/4wd stuff and do stuff right. Fair prices too. A few of us NorCals have been using them with satifaction, they are actually heavier than stock ones w/ much nicer boots = more material good. shanonsf 82 GLW Link to comment Share on other sites More sharing options...
SubaRube Posted August 28, 2003 Author Share Posted August 28, 2003 Thanks , I'll look into that. All I could find in Albany is a place called United Driveline Service on San Pablo. Is that it? Do you have an address or #? Link to comment Share on other sites More sharing options...
shanonsf Posted August 28, 2003 Share Posted August 28, 2003 yep that's the one good luck shanonsf Link to comment Share on other sites More sharing options...
NV Zeno Posted August 28, 2003 Share Posted August 28, 2003 Yep, What Shanon said..I'm running axles from United, I feel confident in their quality. Link to comment Share on other sites More sharing options...
ByTheSea Posted August 29, 2003 Share Posted August 29, 2003 Hey all, If anyone is about to buy axles from a place that does custom work then it might be worth seeing if they would ship the guts out for cryogenic treatment before they assemble it. Diversified charges $1.65 each for parts under 4 oz and $5 per pound for non-specific stuff(which these are) so it would be probably $25 extra with shipping per axle to cryo the important parts. Still less than new SOA parts. PS See how easily I spend other peoples money to test my ideas PPS I use axles from NAPA and Autozone and they both suck equally but I am way too abusive with my driving. Link to comment Share on other sites More sharing options...
rallyruss Posted August 29, 2003 Share Posted August 29, 2003 shanonsf how much did those run aprox? I just ordered a reman axle tonight for the RX the other side will need one soon. I know GKN makes new axles for some subes. but it is a bit pricy 150 or so. a bit unrelated but has any one had the inner bearing pop out when driving out the outer joint? Link to comment Share on other sites More sharing options...
ByTheSea Posted August 29, 2003 Share Posted August 29, 2003 Originally posted by chef_tim Hi Brad!!! Napa here uses CCT Axles. What brand do they use there on the Right coast??? Hi Tim whats shakin??? I'm not sure of the brand offhand but I will try to look tomorrow as I have one stashed at the garage. It is a plain cardboard box with black and red lettering for what thats worth. Say hello to Vicky for me. Brad Link to comment Share on other sites More sharing options...
NV Zeno Posted September 5, 2003 Share Posted September 5, 2003 Subarube and Rallyruss The axles at United were $75, with a $35 core. Excellent quality. I don't think they do anything "space age" like ship or internet sales (they don't even take credit cards!), but their quality and knowledge of the product is worth it. United Drive Line Service 810 San Pablo Ave Albany, Calif. (510) 527 6879 Link to comment Share on other sites More sharing options...
NV Zeno Posted September 5, 2003 Share Posted September 5, 2003 Oh yeah, one more thing. ARI axles. I cannot stress enough the importance of staying clear of ARI axles (greenish-blue and white box). Those are the absolute worst axles I have ever installed on my car. The retailers that sold them to me had no problem when I brought them back (and there were many different retailers). I understand CVaxles.com has a pretty good product, some of the others here are familiar with them, I am not. Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted September 5, 2003 Share Posted September 5, 2003 I've got 2 CCT's from Autozone on the Brat, and they've held up to the 6 and 30" tires now with no problems. They are lifetime warranty axles too, so if they do breaks, I jes take em back, and trade em in on some new ones. These are the front ones, haven't replaced the rear ones yet, haven't had too. Link to comment Share on other sites More sharing options...
SubaRube Posted September 5, 2003 Author Share Posted September 5, 2003 ARI and CCT are the same company, so I guess it's kind of a crap shoot when buying them. Carquest says ARI builds their CV's and of course CCT makes them for NAPA. I doubt either would put their name on a piece of shiite. Of course that doesn't mean you aren't still going to get some rubes in the bunch. I think I remember someone saying they got nothing but junk CCT's from Autozone. Go figure. Probably didn't cross his fingers when he bought 'em. Anyone tried A1 Cardone axles? Link to comment Share on other sites More sharing options...
ByTheSea Posted September 14, 2003 Share Posted September 14, 2003 Hey Tim, Good on you trying the untried! Saves me money,,,LOL. Let us know how they work out. Brad Link to comment Share on other sites More sharing options...
asavage Posted September 21, 2003 Share Posted September 21, 2003 Let me add my voice to the "no ARI" list. Aside from the iffy joint rebuild, their boots don't seem to hold up very well, either. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now