XSNRG Posted March 3, 2005 Share Posted March 3, 2005 Is there a write up on how to do this stuff? I found lots of info but nothing specific about where and how to plumb for the best performance. This will be on my '87 RX, I have a Saab 900 BPV, a turbo XS MBC and an Autometer boost gauge. Looking for the best place to plumb this stuff, if I need any additional parts and any helpful tips. Thanks Link to comment Share on other sites More sharing options...
gravelRX Posted March 3, 2005 Share Posted March 3, 2005 Boost gauge goes here. Shows vacuum and boost. Jay Link to comment Share on other sites More sharing options...
XSNRG Posted March 3, 2005 Author Share Posted March 3, 2005 Thanks Jay! 1 down, 2 to go... Link to comment Share on other sites More sharing options...
calebz Posted March 3, 2005 Share Posted March 3, 2005 MBC goes on that little vacuum line that goes to the wastegate Link to comment Share on other sites More sharing options...
XSNRG Posted March 4, 2005 Author Share Posted March 4, 2005 That simple? cool. Is that your BOV/BPV plumbed into the intake hose thing? thanks Link to comment Share on other sites More sharing options...
XSNRG Posted March 13, 2005 Author Share Posted March 13, 2005 Caleb? Link to comment Share on other sites More sharing options...
calebz Posted March 13, 2005 Share Posted March 13, 2005 Caleb? Sorry bud, Didn't see this until now:o Yes, when I had it set up for recirculation, It simply 'blew off back into the intake silencer. anywhere between the MAF and the turbo inlet is fine. It just so happens that that intake silencer thingy was ideal for the parts I had. Since I have switched IC's and Valves, I get to start that part of the plumbing all over again. Yay Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 13, 2005 Share Posted March 13, 2005 Caleb, here's the most easiest thing I came up with on the TD04 conversion and I'm doing it to mine currently. Get a WRX turbo inlet hose and it'll hose clamp right onto the stock TD04. Then get a recirc hose for a WRX and it'll plumb right into it. I got it since I'm using the AEM cold air intake from a WRX and so I wanted to get the piece that goes between the turbo and the intake. I got a turbo inlet hose for an '04 STi for 25 bucks shipped and it goes right onto the end of the turbo and it also has the spot where the stock recirc hose plumbs into it. If anything, hit me up on AIM... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now