Brettm57 Posted August 29, 2003 Share Posted August 29, 2003 My '90 Legacy wagon tach needle lays on zero all the time. It used to bounce up and down occasionally and start working, but now it doesn't work at all. Any ideas where I should start looking? Link to comment Share on other sites More sharing options...
Subie Gal Posted August 29, 2003 Share Posted August 29, 2003 speed sensor? speedo cable? those would be my first guesses.... hope this helps Jamie Link to comment Share on other sites More sharing options...
ScoobySchmitty Posted August 31, 2003 Share Posted August 31, 2003 Just curious, Does the speedo cable ALSO run the tach? I have a "sticky" speedo cable, but my tach is running just fine. On the other hand, I cannot seem to find a tach cable in my engine. Hmmm... Oh well, time to DANCE! Link to comment Share on other sites More sharing options...
subieman Posted September 1, 2003 Share Posted September 1, 2003 I had the same problem right after I bought my 91 Legacy. The tach would jump around and I would loose the temp gauge from time to time. It just happened to be a wire connector under the dash that came loose. It was pretty easy to locate because it was sparking. hehe :-\ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now