Mykeys Toy Posted March 19, 2005 Share Posted March 19, 2005 I had my 86 Hatch aligned about a year ago and the camber was never right.. So I tried lowering the front to see if it would help.. Nada. The car is still removing the outside edge of the tire on drivers side.. It was affecting the passenger side too but the lowering of the front end seems to have stopped the wear on that side. Is there anything else that will cause the camber to be way off like that? The front is cranked down as far as it will go. Mike Link to comment Share on other sites More sharing options...
RenaissanceMan Posted March 19, 2005 Share Posted March 19, 2005 a bent macpherson strut or spindle can cause camber and steering axis inclination to be all out of whack. Also you might want to inspect the inner control arm bushings to see if they arent collapsed. Link to comment Share on other sites More sharing options...
Mykeys Toy Posted March 19, 2005 Author Share Posted March 19, 2005 How whould I check those, or rather what am I looking for? Link to comment Share on other sites More sharing options...
Turbone Posted March 19, 2005 Share Posted March 19, 2005 The lower control arm has a bushing at the x-member, see if its loose. If you cant find the problem, bring it by my place this weekend. Link to comment Share on other sites More sharing options...
[ i ]nsane Posted March 20, 2005 Share Posted March 20, 2005 Possible ball joint problem Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now