oddcomp Posted September 2, 2003 Share Posted September 2, 2003 so here i am pulling the intake off this rx and notice a second o2 sensor right below the turbo but not hooked up .... umm wtf ?? anyone got a idea why this has 2 o2 sensors 1 before and 1 after the turbo by the way its a 86 Link to comment Share on other sites More sharing options...
Subarutex Posted September 2, 2003 Share Posted September 2, 2003 I am under the assumption o2 sensors are always after the turbo. Perhaps the downstream one (factory one) becamse disfunctional and they weren't able to get it out of the bung. So they drilled, and installed another one? Link to comment Share on other sites More sharing options...
GLCraig Posted September 2, 2003 Share Posted September 2, 2003 I have no clue why you have that. Every turbo I've seen has the o2 after the turbo. Link to comment Share on other sites More sharing options...
Adam N.D.J. Posted September 2, 2003 Share Posted September 2, 2003 Someone replaced the uppipe on it with one off an EA81. My EA81T had it on the up-pipe, and when it went south, I replaced it with an EA82 one, and the EA82 one had a plug in the port. This is what leads me to believe that they jes used the same crossover from 81 to 82. Either that or a previous owner had an A/F meter in there, and put in the second O2 for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now