Flowmastered87GL Posted April 1, 2005 Share Posted April 1, 2005 Craig came over today to grab some parts and chat... we measured the failing clutch on my brat and came up with the following measurement of the "step" between the ring gear and the inner part (where the disk sits) of the flywheel. We got a measurement of (more or less) 0.9000 Inches. Does anyone know if its supposed to be this deep? Or should it be more like .8500 or less? more?? We couldnt turn the clutch with the plastic alignment tool, but it sure as hell isnt grabbing against the torque of my webered EA81! My Chiltons manual doesnt have specs for flywheel depth. And for those wondering... this is for a 4WD 82 brat. Its the tiny (commonly called 2WD clutch) NOT the big one that 83-84 Ea81's have. Link to comment Share on other sites More sharing options...
archemitis Posted April 1, 2005 Share Posted April 1, 2005 get a new clutch kit(pp and friction), and you;ll be cool. Link to comment Share on other sites More sharing options...
GLCraig Posted April 2, 2005 Share Posted April 2, 2005 he already has all new clutch parts, Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted April 2, 2005 Author Share Posted April 2, 2005 Ya, everything EXCEPT the flywheel is new... and that has been resurfaced, but to what we belive to be the wrong specs. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now