starkiller Posted April 4, 2005 Share Posted April 4, 2005 can you and what's the method?? thanx! alan Link to comment Share on other sites More sharing options...
75skunkaroo Posted April 4, 2005 Share Posted April 4, 2005 wd-40 and steel wool -mike Link to comment Share on other sites More sharing options...
TomRhere Posted April 4, 2005 Share Posted April 4, 2005 If it's just surface rust, Turtle Wax will remove it, takes some elbow grease but it works. You want the liquid type, not the paste. If the rust is deep, you won't get it all without removing the Chrome in that area Link to comment Share on other sites More sharing options...
Craven Posted April 4, 2005 Share Posted April 4, 2005 Are they chrome or stainless steel? Link to comment Share on other sites More sharing options...
starkiller Posted April 4, 2005 Author Share Posted April 4, 2005 well, they are ones i am going to pull from some old subies in the j/y... Link to comment Share on other sites More sharing options...
mtsmiths Posted April 4, 2005 Share Posted April 4, 2005 Bon-Ami, "Hasn't scratched yet", then any good polish/wax. Link to comment Share on other sites More sharing options...
Craven Posted April 4, 2005 Share Posted April 4, 2005 Brillo bad with the soap works great or you could go with some sort of Chrome polish. Link to comment Share on other sites More sharing options...
Craven Posted April 4, 2005 Share Posted April 4, 2005 well, they are ones i am going to pull from some old subies in the j/y...I believe they are stainless steel. Link to comment Share on other sites More sharing options...
mcbrat Posted April 4, 2005 Share Posted April 4, 2005 Link to comment Share on other sites More sharing options...
NV Zeno Posted April 4, 2005 Share Posted April 4, 2005 If chrome, DON'T use steel wool/Brillo. One of the cheap-o liquid car waxes worked for me, or (if you can find it) "Chrome Polish" = liquid in a bottle/can...works even better. After cleaning them up, give them a good coat of wax. It helps repel the snow and mud (and water) a little. I spray the backs with a light coat of WD-40, it helps slow the rust and corrosion some. Just my 2 bucks Link to comment Share on other sites More sharing options...
ccrinc Posted April 5, 2005 Share Posted April 5, 2005 Boy, don't you guys ever scrub pots and pans? Scotchbrite has several no-scratch fake steel wool pads that will do the trick and won't scratch the metal much, if at all. You can find them in grocery stores, Home Biggies, Walmart, etc. Doesn't have to be the Scotch brand: just look in the home stuff section for non-scratch pads. Incidentally, we use them at the shop for taking the final little bit of sealer off aluminum mating surfaces like block halves. Emily http://www.ccrengines.com Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now