Aubrey Posted April 9, 2005 Share Posted April 9, 2005 Hi, The condenser fan next to my cooling fan on my 91 Legacy Turbo does not turn on when I turn on the AC. In fact, I have never seen it running at all. My AC was converted to R134a about three years ago and works okay, as long as it doesn't get too hot out (30+ degrees C). If I'm in city traffic in the summer heat the compressor starts cycling off and the AC can't stay cool until I get moving again. So I'd like to get the fan working before summer comes again. Any ideas of what could be wrong? The fuse is okay, I haven't been able to trace the rest of the wiring. Thanks, Ian Link to comment Share on other sites More sharing options...
99obw Posted April 10, 2005 Share Posted April 10, 2005 I would start with the relay as that is easy to test. If that works next check for power at the fan. Someone with schematics (Josh) for your car may be able to give more precise instructions. Link to comment Share on other sites More sharing options...
Legacy777 Posted April 10, 2005 Share Posted April 10, 2005 Yeah, start with the relay....check out this thread for wiring info. The 92 should be the same as the 91 for wiring. http://www.ultimatesubaru.org/forum/showthread.php?t=34140 More then likely, you need to add refridgerant.....that's the reason it's not staying cool. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now