slidewaysuby Posted April 27, 2005 Share Posted April 27, 2005 so i bought a 95 impreza with a ej18 and the car has really bad hesitation (so bad it barely moves) so when i bought it i just figured the timing belt was off a tooth.....well i tore into it and all the marks line up perfect. anybody have any ideas on what could be causing the hesitation? Dylan Link to comment Share on other sites More sharing options...
slidewaysuby Posted April 28, 2005 Author Share Posted April 28, 2005 bump Link to comment Share on other sites More sharing options...
slidewaysuby Posted April 28, 2005 Author Share Posted April 28, 2005 i pulled the codes and got 13, cam position sensor? should i just replace it and see if that works? Link to comment Share on other sites More sharing options...
frag Posted April 28, 2005 Share Posted April 28, 2005 i pulled the codes and got 13, cam position sensor? should i just replace it and see if that works? That's what I would recommend. You're lucky it's only 17$ at 1stSubaruparts. Moreover, it's probably the easiest part to replace on your engine. One connector and one bolt. Link to comment Share on other sites More sharing options...
simbey1982 Posted April 29, 2005 Share Posted April 29, 2005 Yeah replace that sensor....and clear the ECU Unhook the Negative termianal for about an hour Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now