the sucker king Posted May 3, 2005 Share Posted May 3, 2005 exhaust pipes. Link to comment Share on other sites More sharing options...
soobmater Posted May 3, 2005 Share Posted May 3, 2005 Definatly exaust pipes:grin: I like the idea of the 5-100 hub. Hey shady you should make some hubs for us:brow: Link to comment Share on other sites More sharing options...
SuBrat84 Posted May 3, 2005 Share Posted May 3, 2005 Exhaust pipes would be GREAT! If you could do the Y-Pipe w/ Cat, Intermediate Pipe, and a muffler for $300 .. you'd have my business. but it needs to be a proper soobie style "Y" - pipe.. not some POS like WALKER POS POS POS STUPID POS "T" into the CAT Pipe!! GRRRR I hate those SOBS!!! Hehe.. had to rant! and oh yeah.. LOCKERS! Link to comment Share on other sites More sharing options...
Shadyirishmen Posted May 3, 2005 Author Share Posted May 3, 2005 You would definitely be camouflaged in the cow fields. To all those that want skidplates, here's some advice:If you need a skidplate, you're not lifted enough. Toss out everything else.. lockers are the way to go! Something like an OX locker would be the absolute greatest thing! (reference: http://www.tonsure.com/4x4/ox.htm and http://www.4wheeloffroad.com/brandpages/ford/131_0209_lock/) Some lower low range gears would also be beneficial. Oh yeah.. a 50 BMG (non-functional of course) and its accompanying mount would also be a welcome addition on my Brat. Hell, I'm already painted up for it. Link to comment Share on other sites More sharing options...
soobmater Posted May 3, 2005 Share Posted May 3, 2005 hey shady you have a pm Link to comment Share on other sites More sharing options...
soobscript Posted May 3, 2005 Share Posted May 3, 2005 My List (to add votes for the popular ones ) ====================================== Skid plates, front and rear, engine, y-pipe, diff., axles Push bar / brush guard, eventually with optional mounts for lights or winch Fender flares for hatchback Hood scoop sized for EA82's Hubs with common bolt pattern Forged pistons and other internals once you get the computerized R&D facility up and running. XTREME Headlight Fluid anything 2 make old soobs 2 fast and/or 2 furious Link to comment Share on other sites More sharing options...
ausubaru92 Posted May 3, 2005 Share Posted May 3, 2005 Some of this stuff in Australia would be great Got any other designs for the wheels? Link to comment Share on other sites More sharing options...
erik litchy Posted May 3, 2005 Share Posted May 3, 2005 there have been a LOT of requests for momo style steering wheel adapters that have gone obsolete, although i dont think anyone has inquired with momo about them starting another production run Link to comment Share on other sites More sharing options...
MorganM Posted May 3, 2005 Share Posted May 3, 2005 ...lower low range gears ... crawling gears A real low range! Link to comment Share on other sites More sharing options...
A DOG Posted May 3, 2005 Share Posted May 3, 2005 When you do start making the brushgaurds keep in mind that you want to help the approach angle not destroy it. I've seen quite a bit of subies with brushgaurds that kill the approach angle. Link to comment Share on other sites More sharing options...
Caboobaroo Posted May 3, 2005 Share Posted May 3, 2005 I'm looking for more body mods for on the street. Looking into fiberglass widebody kit as already mentioned or maybe some fender flares to give my RX a more WRX stance instead of being flat and boring... fiberglass hood with WRX hoodscoop mounted in it as well:D Link to comment Share on other sites More sharing options...
carfreak85 Posted May 3, 2005 Share Posted May 3, 2005 5x100 bolt on hubs for EA81s and camber plates again! These would be on the tipity top of my list. Link to comment Share on other sites More sharing options...
Shadyirishmen Posted May 3, 2005 Author Share Posted May 3, 2005 I hear you brother, i have got the design. Another problem I have seen is weight, people put these humongeous cow bars on the front good god it will eat ten of your 80 horsepower. When you do start making the brushgaurds keep in mind that you want to help the approach angle not destroy it. I've seen quite a bit of subies with brushgaurds that kill the approach angle. Link to comment Share on other sites More sharing options...
A DOG Posted May 3, 2005 Share Posted May 3, 2005 I hear you brother, i have got the design. Another problem I have seen is weight, people put these humongeous cow bars on the front good god it will eat ten of your 80 horsepower. Weight is an issue, but you could probably put around 50lbs and it wouldn't hurt. And 50lbs is a lot of bumper. Link to comment Share on other sites More sharing options...
oddcomp Posted May 3, 2005 Share Posted May 3, 2005 i did in fact build a honest 80lb bumper for my s-10 didn't look to much diffrent that the stock one.. sorta Link to comment Share on other sites More sharing options...
ecky Posted May 4, 2005 Share Posted May 4, 2005 maybe somebody already said this, but I would like to see A gen one brat top without the large lump for the roll bar, and like everybody else, WHEELS. Just was thinking about it, Maybe you could fab up some dual carb intakes too. Link to comment Share on other sites More sharing options...
bratsrus1 Posted May 4, 2005 Share Posted May 4, 2005 Hi This is Jerry, everybody is asking for these things for the outside of there cars. Well the bestest thing any body can come up with is a set of gears for the 5 speed dual range tranny 4.44 Come on everybody say yes that would be a great idea, i can't hear you say YES. Oh BTW i am first in line to buy these gears. Thanks Jerry Link to comment Share on other sites More sharing options...
Matty B Posted May 4, 2005 Share Posted May 4, 2005 If you make the brushguards or bullbars out of alloy (aluminium) I don't think weight will be an issue. Most bullbars on Subies in Oz are alloy. Mine is mainly 8mm in the bumper area and heavy walled tube. I can lift it without effort with one hand. (no steriods or freaky stength here) The 10mm skid plate (sump to gearbox) weighs about the same. Link to comment Share on other sites More sharing options...
Ratty2Austin Posted May 4, 2005 Share Posted May 4, 2005 The ever-coveted tailgate trim for a gen 2 Brat. Muahahhhah!!! and I have 2 in my garage UNOPENED OEM NOS!!!! BTW, there are only ****3**** left in the US in stock with subaru dealers... at least last time i checked... Link to comment Share on other sites More sharing options...
Turbone Posted May 4, 2005 Share Posted May 4, 2005 Roof Racks Roof Racks Roof Racks Oh, and maybe a Light Bar on a Roof Rack Link to comment Share on other sites More sharing options...
Rattle wagon Posted August 9, 2005 Share Posted August 9, 2005 How about gen1 lift kit, Subframe connectors, upper strut tower braces? Link to comment Share on other sites More sharing options...
soobmater Posted August 9, 2005 Share Posted August 9, 2005 that would be cool, it would be nice to see some lifted gen 1's around here. Link to comment Share on other sites More sharing options...
Meeky Moose Posted August 9, 2005 Share Posted August 9, 2005 the one thing i want for my soob that is not available, or i can't find at least, is a brush gaurd the does not require removing the stock bumper. I want something that will protect the front of my car, (from deer for example) something like you would see on a toyota 4-runner only in a flat black. would have to be semi light wieght too, adding 200lbs to the front of my car is not what i have in mind.. If it had a steel mounting point and center braces in front of the grill, then aluminum outer frame that goes around the headlights, and aluminum tubes between the center bars in front of the grill. then shipped in the raw so i could paint it, or you could offer colors, etc.. thats what i want personally.. since i have no interest in lifting my soob.. can you help i wonder? Link to comment Share on other sites More sharing options...
subyrally Posted August 9, 2005 Share Posted August 9, 2005 we need a rally cr style brush bar, something for mounting driving lights and what not. somethine that would look cool on a rx or impreza. Link to comment Share on other sites More sharing options...
uncoolperson Posted August 9, 2005 Share Posted August 9, 2005 you guys (if adventurous...) should do what this company does for delorean, but for subarus.http://www.delorean.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now