ajosefick Posted May 9, 2005 Share Posted May 9, 2005 Hi to all, I have a 1999 Forester and for the past week I have been getting an intermittent CEL with a code of P0325 (knock sensor). Could someone please tell me where the knock sensor on my car is located. Is it on the driver side as I suspect? The only manual I have is a Haynes for a 1998 Legacy and it states that to remove the sensor the intake manifold must be removed first. I see other messages that state it is a 15 to 20 minute job. If any pictures are available for a '99 Forester that would also be greatly appreciated. Thanks in advance, A.J. Link to comment Share on other sites More sharing options...
lmdew Posted May 10, 2005 Share Posted May 10, 2005 Look straight down behind the intake manifold, just to the left of the throttle cables. Its straight down, a 12mm bolt, single wire going off about an 1.25" dia. black sensor. The connector is harder to unplug than it is to remove the sensor. Later, Link to comment Share on other sites More sharing options...
ajosefick Posted May 10, 2005 Author Share Posted May 10, 2005 Thanks Imdew for your prompt and precise reply. Appreciate it. Have a good day. -AJ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now