Scott in Bellingham Posted May 21, 2005 Share Posted May 21, 2005 on the rear diff what can be done ? can it be tilted for greater ground clearance on the front near the u-joint , I understand there is a problem with oil , what works how far can you tilt it ,what modifications can be done to overcome this thanks SJR Link to comment Share on other sites More sharing options...
Shadyirishmen Posted May 21, 2005 Share Posted May 21, 2005 Our lift kits leave the front of the diff at an angle about 5 degrees or less, but we have had not a single problem with oiling. Mudrat another member on the board says that they have to be perfectly flat, but as I said before we have ours near 5 degrees no problems. Scott in Bellingham said: on the rear diff what can be done ? can it be tilted for greater ground clearance on the front near the u-joint , I understand there is a problem with oil , what works how far can you tilt it ,what modifications can be done to overcome this thanks SJR Link to comment Share on other sites More sharing options...
4x4mudrat Posted May 21, 2005 Share Posted May 21, 2005 I do not endorse running the rear diff at any angle other than horizontal. If you choose to run the diff at an angle, be sure to fill it before you tilt it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now