Subaru X Posted May 22, 2005 Share Posted May 22, 2005 http://www.geocities.com/ryu2326/intake.jpg Had to do some welding and grinding to get this to work. But sounds nice and beefy when I throttle it. Plus I get another 2-3 mpg now. Woooo. Things I've done so far Headgaskets Re-cored radiator Brakes timming belt flushed the system spark plugs (duh) 20% tint...changing to 5% next week I also replaced the rear quarter window that was busted out. Re-tinted it too. Replaced all the struts with KYB GR2 struts. Lower balljoints, and then re-aligned the car. Now...all that is left...is the pesky knock sensor that just recently went. body work and someday a paint job..oh yeah I think I want to re-upholster the interior to leather. Link to comment Share on other sites More sharing options...
Setright Posted May 22, 2005 Share Posted May 22, 2005 Nice. If the roar begins to get on your nerves consider extending the pipe into the top of the fender cavity and placing the filter there. Link to comment Share on other sites More sharing options...
subie94 Posted May 22, 2005 Share Posted May 22, 2005 you have abs ? on my 94 legacy gt i found out i can't use the stock intake tube along with the cone filter cause the abs pump is in the way.i can see that your tube isn't stock.wasn't sure if the chrome tube you have is designed for a subaru with abs. i should be able to buy just the tube.or i could see about modifing the stock tube. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now