mcbrat Posted May 27, 2005 Share Posted May 27, 2005 anybody have one of these nedle valves? http://www.ultimatesubaru.org/forum/showthread.php?t=36850 I have 1 missing...... also, I know there are a couple of folks out there with the dual carb set-up... can somebody get a closeup pic of the mounts for the synchro bar. I had to mkae my own, but I'm still curious what a stock one looks like.... Link to comment Share on other sites More sharing options...
moosens Posted May 28, 2005 Share Posted May 28, 2005 anybody have one of these nedle valves? http://www.ultimatesubaru.org/forum/showthread.php?t=36850 I have 1 missing...... also, I know there are a couple of folks out there with the dual carb set-up... can somebody get a closeup pic of the mounts for the synchro bar. I had to mkae my own, but I'm still curious what a stock one looks like.... I wish I could get a pic for you,sorry,everything is kind of buried. Link to comment Share on other sites More sharing options...
Caboobaroo Posted May 28, 2005 Share Posted May 28, 2005 unfortunatly the only Hitachi EA71 carbs I have are back in Oregon, along with my EA71 dual carb setup:( Link to comment Share on other sites More sharing options...
Robert M Posted May 28, 2005 Share Posted May 28, 2005 You can always take the remaining needle to a good machine shop. They can fabricate one for you. May cost a few bucks, though. Link to comment Share on other sites More sharing options...
SUBARU3 Posted May 28, 2005 Share Posted May 28, 2005 I think I have one. I will look. Todd Link to comment Share on other sites More sharing options...
Zefy Posted May 28, 2005 Share Posted May 28, 2005 i got 2 spare carbs sitting in my garage... that valve is the idle mixture adjustment screw right??? i got 2 if you need it... one is a little different though... Link to comment Share on other sites More sharing options...
mcbrat Posted May 29, 2005 Author Share Posted May 29, 2005 i got 2 spare carbs sitting in my garage... that valve is the idle mixture adjustment screw right??? i got 2 if you need it... one is a little different though... anyway to get pics... I need to have one exactly like the one I have... after talking with a racer friend, I definitley want to get a "factory" one. don't want to use one off a weber.... Link to comment Share on other sites More sharing options...
SUBARU3 Posted May 29, 2005 Share Posted May 29, 2005 http://www.ultimatesubaru.org/photos/uploads/144/PDC_0079.JPG If you need it, let me know. Todd Link to comment Share on other sites More sharing options...
Zefy Posted May 29, 2005 Share Posted May 29, 2005 i think your in luck Mick... mine looks exactly the same and the other is pretty darn close... the one on the left is the same as yours and when i took it out there was no slop in the screw... the second is off an older carb i think... its got no auto choke or anything and its very plain... its yours if you want it... i'm sure i can just pop it in an letter and send it to you... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now