86subaru Posted May 28, 2005 Share Posted May 28, 2005 changed coils to acell , regaped plugs at .48 , now it back fires , could i have mixed up coil wires ? timing is set at 8 degrees Link to comment Share on other sites More sharing options...
86subaru Posted May 28, 2005 Author Share Posted May 28, 2005 before all this it ran fine , Link to comment Share on other sites More sharing options...
TomRhere Posted May 28, 2005 Share Posted May 28, 2005 I take it you pulled the coil and wires off the '84 Auto BRAT. Yep, you could've crossed-up a couple of the plug wires. That will definetly cause it to backfire. #1 is the rearmost on the disty cap, turns CCW going from memory only here, as the books are out in the garage. 3-4 1-2 That be the cylinder layout of the engine. --1-- 3-C-4 --2-- That be the disty cap layout. Link to comment Share on other sites More sharing options...
86subaru Posted May 28, 2005 Author Share Posted May 28, 2005 i changed 1 wire at a time , only used the coil from the a/t brat , i have no time to mess with the brat , taking the dl wagon , thanks Link to comment Share on other sites More sharing options...
SuBrat84 Posted May 28, 2005 Share Posted May 28, 2005 3-4 1-2 That be the cylinder layout of the engine. --1-- 3-C-4 --2-- That be the disty cap layout. This is correct Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now