Matty B Posted May 31, 2005 Share Posted May 31, 2005 G'day guys, I have put EA82 steering and control arms in the Wonder Brumby, subsequently my rear track is 3" narrower than my front. I was thinking of putting 1.5" spacers on each rear hub to correct it. http://www.truckn-store.com/product.asp?source=&ID=89118&returnURL=%2Fproduct%5Flist%2Easp%3Fid%3D1482 Our 4 stud pattern is 4 x 100mm, am I correct? Thanks, Matt Link to comment Share on other sites More sharing options...
Qman Posted May 31, 2005 Share Posted May 31, 2005 4X140mm I have run spacers on my offroad Brat. They work but I still don't really like them. Link to comment Share on other sites More sharing options...
Matty B Posted June 1, 2005 Author Share Posted June 1, 2005 Thanks Qman, Why don't you like them? Extra stress on bearings? Matt Link to comment Share on other sites More sharing options...
Qman Posted June 1, 2005 Share Posted June 1, 2005 Depending on the wheels and tires you are running it can add stresses to the bearings. When I did the solid rear axle swap into my BRAT I had to add 2 1/2" per side to match the Subaru track. I didn't have any issues but, I just didn't like running them. Many people are using them to correct tracking issues. Just my preference. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now