lilluke Posted June 20, 2005 Share Posted June 20, 2005 im from australia and have a subaru brumby, i think you guys call them brats, yeah? i was just wondering about adjusting the idle, it currently runs on gas not petroleum and it is idling really low and stalling when you take your foot off the accelerator, is the idle screw facing the front just underneath the air cleaner or is that the auto choke adjuster? Link to comment Share on other sites More sharing options...
redskin Posted June 20, 2005 Share Posted June 20, 2005 im from australia and have a subaru brumby, i think you guys call them brats, yeah? i was just wondering about adjusting the idle, it currently runs on gas not petroleum and it is idling really low and stalling when you take your foot off the accelerator, is the idle screw facing the front just underneath the air cleaner or is that the auto choke adjuster? the idle screw does face the front and is situated on the drivers side of the carb, long screw between carb body and cable pulley but be sure to check your engine tune first, (timing, etc), before adjusting this as bad tune will also affect your idle. Link to comment Share on other sites More sharing options...
555Ron Posted June 21, 2005 Share Posted June 21, 2005 Hi there, I'm from Maitland:). Never thought i'd find someone this close to me. Does it run smoothly on the unloaded but rough on the LPG? Anyway, i have NFI... I just wanted to say hello. Yeah, Brats = Brumby, XT = Vortex, Loyale = Leone, Legacy = Liberty, from what i have worked out. Link to comment Share on other sites More sharing options...
redskin Posted June 21, 2005 Share Posted June 21, 2005 Yep, we Aussies are everywhere Ron, Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now