Jump to content
Ultimate Subaru Message Board

Recommended Posts

Has anybody figured out a good way to do this without spilling tranny fluid all over the place?? I'm assuming i'm doing it right by adding through the dipstick tube. I used the smallest funnel I could find last time and it ran everywhere. I thought my pan was leaking till I figured out what was going on. Who's got tips??

Link to comment
Share on other sites

You're on the right track. Try rolling up a sheet of paper and sticking one end in the dipstick tube. If you don't have enough clearance, use a piece of hose with a paper funnel on one end. The latter method would require four hands.

Link to comment
Share on other sites

WAIT!

It's simple: Get a rubber hose that fits inside the dipstick tube, about 1/2 inch external diameter, cut it down to about two foot in length and slide one end into the dipstick hole. The other end will be high up and easy to reach. Attach a small funnel and off you go!

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...