samo Posted July 6, 2005 Share Posted July 6, 2005 Took the wagon through a semi-deep (2' or so) mud hole on Saturday, and now the interior is just downright disgusting. I got most of the mud out, but I can see why a lot of you guys don't use carpeting. For those of you who have no carpeting, how do you hide all the wiring that normally hides underneath? Anybody Rhino-lined their floors for better grip? Link to comment Share on other sites More sharing options...
ezapar Posted July 6, 2005 Share Posted July 6, 2005 Truck floor mats. They kill road noise, protect the wiring, and are easy to pull out and clean. Fred Meyer, Schucks, and Wallmart are good places to get them. Link to comment Share on other sites More sharing options...
MorganM Posted July 6, 2005 Share Posted July 6, 2005 I ripped out all the interior carpet and padding. Then threw down the floor mats. Cover the wiring? Naw its cool I just left it all as is. A lot of it is taped down from the factory and they have brackets holding it all in place. The connections appear to be at least water resistant if not 'water proof'. The mud really is just a mess and I'm getting pretty sick of it. It just gets EVERYWHERE and makes a huge mess to clean up and repairs more difficult. I really only go through it when I have to as part of a trail now. No more mud pits for me! :-p Link to comment Share on other sites More sharing options...
Andyjo Posted July 6, 2005 Share Posted July 6, 2005 Get yourself a pressure washer, and nail the inside Link to comment Share on other sites More sharing options...
MorganM Posted July 6, 2005 Share Posted July 6, 2005 Get yourself a pressure washer, and nail the inside I'll be buying more important tools before any pressure washer that's for sure Link to comment Share on other sites More sharing options...
DeathHatch Posted July 6, 2005 Share Posted July 6, 2005 ya i know what ya mean man. i have had a good 1-2 in of mud/goop in my car after this really deep pit. i plan on geeting it rhino lined and i have mats already for it. http://www.ultimatesubaru.org/photos/showphoto.php?photo=6593&sort=1&cat=500&page=1 ya heres a picture of it Link to comment Share on other sites More sharing options...
felipe01forester Posted July 6, 2005 Share Posted July 6, 2005 Why not get some heavy-duty door seals? Link to comment Share on other sites More sharing options...
MorganM Posted July 6, 2005 Share Posted July 6, 2005 Why not get some heavy-duty door seals? In that second pic of the mud inside my cab. Notice the big fist size hole. Its kinda hard to see becuase the ground is pretty much the same color as the body. The doors seal okay... its the fist size holes in multiple spots that get me! Link to comment Share on other sites More sharing options...
stinky Posted July 7, 2005 Share Posted July 7, 2005 I painted my floor with black tar based sound deadener/rust preventer in a really thick coat. this covered the wires as well. I then just threw down a few cheap car matts. works great Link to comment Share on other sites More sharing options...
1992UAV Posted July 7, 2005 Share Posted July 7, 2005 Get yourself a pressure washer, and nail the inside Pressure washer on the cheap... if ya got an air compressor that is... Hook up a cheap sand blaster gun to an air supply buy a garden hose hose clamp it to the siphon point of the gun turn on the water and there ya go.... not as powerful as a pressure washer but it gets the job done Link to comment Share on other sites More sharing options...
soobmater Posted July 7, 2005 Share Posted July 7, 2005 that is some nasty mud morgan. the mud is only fun until you have to wash it. Link to comment Share on other sites More sharing options...
Mike W Posted July 7, 2005 Share Posted July 7, 2005 I used rubberized underbody coating on mine and it stunk for weeks and tended to smear in hot weather. So then as an experiment I shot some spraycan truck bed coating over the underbody coating. Not a good idea... it cracked and then smeared. So then I stripped off the under coating and took it down to just the tar mats and paint and sprayed on multiple coats of truck bed liner. That works ok but worth the trouble??? No way. Real Rhino Liner or equivilent would be nice but don't bother with the cheap stuff. Doing it again I'd just toss the carpets and tar mats and hammer the floor boards so the muck drains out the drain holes better. Oh yeah, the vintage 1980 vinyl floor mats I got from Zap work great. They deaden some road noise and who cares if they get wet. Link to comment Share on other sites More sharing options...
subie94 Posted July 8, 2005 Share Posted July 8, 2005 that is some nasty mud morgan. the mud is only fun until you have to wash it. i have to agree with soobmater,looks really nasty.almost looks like....? um melted brownies or something.as far as cleaning the mud out,i've never had to cause i never let it in. Link to comment Share on other sites More sharing options...
MorganM Posted July 8, 2005 Share Posted July 8, 2005 that is some nasty mud morgan. the mud is only fun until you have to wash it. Ya it was about the consistancy and color of molten clay. It wouldnt really drain out or drip off. Just had to wait for it to dry and break off the thick skin. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now