Midwst Posted July 13, 2005 Share Posted July 13, 2005 The Haynes manual says I have to pull the timing belt to change the crank sensor on my 1991 Legacy, non turbo. Other people say it is easy to change. does the timing belt need to be removed? Thanks. Link to comment Share on other sites More sharing options...
BigMattyD Posted July 13, 2005 Share Posted July 13, 2005 No, the timing belt does not have to be removed as far as I remember. The crankshaft sensor mounts to the top of the oil pump with a single bolt. It should be accessible when you remove the alternator. Matt Link to comment Share on other sites More sharing options...
Midwst Posted July 13, 2005 Author Share Posted July 13, 2005 Thanks. Actually, I guess it was the Chilton's manual that said remove timing belt. Glad to know its not that hard. Link to comment Share on other sites More sharing options...
Legacy777 Posted July 14, 2005 Share Posted July 14, 2005 Ditch the crappy manuals and d/l the factory one from me. http://www.main.experiencetherave.com:8080/subaru_manual_scans/1992_FSM_(Engine_%26_Electrical)/ It's for the 92, however most of the stuff is the same. Link to comment Share on other sites More sharing options...
Midwst Posted July 14, 2005 Author Share Posted July 14, 2005 I tried Josh. It locked up my computer! Will try again later. The aftermarket manuals truly suck. Link to comment Share on other sites More sharing options...
Legacy777 Posted July 14, 2005 Share Posted July 14, 2005 Does the link work? You need to RIGHT CLICK AND SAVE AS the pdf document. Do NOT try and open it from the web. Link to comment Share on other sites More sharing options...
Midwst Posted July 14, 2005 Author Share Posted July 14, 2005 Yes, I tried to open it from the web. Will try the other way. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now