oddcomp Posted July 15, 2005 Share Posted July 15, 2005 seems the tps i was using for my orginal measquirt install has shorted out and is very useless now its all thats holding me up on making the rx run so i have the old one from the 85 rx but i need the pinouts for it what color wires are ground signal and +volt its a 3 wire unit no idle/wot switch otherwise everything else is all wired up in teh rx and seems to check out just need a good tps to put on it so i can start it up also need to know wich wires under the hood at the connector are for the oil psi gauge and the temp gauge plus how the tach is triggered Link to comment Share on other sites More sharing options...
Cougar Posted July 15, 2005 Share Posted July 15, 2005 If you have an ohmmeter handy you should be able to figure out which leads are what pretty easily. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now