A DOG Posted July 25, 2005 Share Posted July 25, 2005 I have been riding my bike to work now for three weeks because no one in town knows how to do a six lug swap on EA81 wagon hubs. I really need help on this one. I got my tires mounted on my toyota rims and all I need is to get my six lug swap done. I'm so close to suby offroadness I can taste it. I really need some pics of disc hubs and drum hubs with the swap done on them or a write up on how to do it. So I can tell my offroad shop how to do it. Thanks Link to comment Share on other sites More sharing options...
ezapar Posted July 25, 2005 Share Posted July 25, 2005 I have been riding my bike to work now for three weeks because no one in town knows how to do a six lug swap on EA81 wagon hubs. I really need help on this one. I got my tires mounted on my toyota rims and all I need is to get my six lug swap done. I'm so close to suby offroadness I can taste it. I really need some pics of disc hubs and drum hubs with the swap done on them or a write up on how to do it. So I can tell my offroad shop how to do it. Thanks If you'll take a minute to read the F.A.Q. at the top of the forum, you'll find the link you're looking for. Link to comment Share on other sites More sharing options...
A DOG Posted July 25, 2005 Author Share Posted July 25, 2005 I know how to drill the holes and where, but on the back of the hub where you put the new lugs it's not flat. Do you have to machine it flat? Or does it matter if the new lugs hangover a little. Then do you have to weld the back of the lugs into place? Or will they hold in there. My machine shop is just worried about safety. So they don't want to do it until they know exactly what to do. Link to comment Share on other sites More sharing options...
Jibs Posted July 25, 2005 Share Posted July 25, 2005 Here are some pics of a set of hubs I've had redrilled to 6 lug. Top: Bottom: And a closer view of the new studs: I've found that you should pound out the 2 opposing studs yourself before taking it in to a shop. Then, take a rim with you into the shop, and bring 2 lugnuts with you. Have them mount the rim to the hub and drill them. That's what I did with mine at the machine shop here. There was no welding involved. Hope this helps! They shouldn't charge you too much to do them either, the very first set of 4 hubs I took in cost me 180$, then I took a pair of rear disc hubs in to get drilled and he charged me 65$, so if they want something outrageous, let me know and we might be able to work something out. (By the way, I am going to have a set of rear drum brakes drilled out to 6 lug for sale here pretty quick if you want them.) Link to comment Share on other sites More sharing options...
A DOG Posted July 25, 2005 Author Share Posted July 25, 2005 Thanks you sooo much. Do you have any pics of the drums drilled out? Link to comment Share on other sites More sharing options...
Jibs Posted July 25, 2005 Share Posted July 25, 2005 This is all I have: Top: Link to comment Share on other sites More sharing options...
MorganM Posted July 25, 2005 Share Posted July 25, 2005 Could have had them shipped to Archemitis, properly done, shipped back, and on your car by now Why is your machinist asking YOU how to machine the back of the hub properly? Link to comment Share on other sites More sharing options...
A DOG Posted July 25, 2005 Author Share Posted July 25, 2005 Why is your machinist asking YOU how to machine the back of the hub properly? Because I don't think they've had to do this before. Link to comment Share on other sites More sharing options...
A DOG Posted July 25, 2005 Author Share Posted July 25, 2005 (By the way, I am going to have a set of rear drum brakes drilled out to 6 lug for sale here pretty quick if you want them.) How much? Link to comment Share on other sites More sharing options...
archemitis Posted July 25, 2005 Share Posted July 25, 2005 any machine shop with a rotary table and someone who actualy knows how to use it can do this with no problem. i bet they dont want to do it. it will take them too long, and they cant realy charge you too much to do it. are they even shooting you a price? id guess around 250 bucks from a normal machine shop. Link to comment Share on other sites More sharing options...
ezapar Posted July 25, 2005 Share Posted July 25, 2005 Could have had them shipped to Archemitis, properly done, shipped back, and on your car by now Why is your machinist asking YOU how to machine the back of the hub properly? That's right. And. . . yeah, how come? Link to comment Share on other sites More sharing options...
Qman Posted July 25, 2005 Share Posted July 25, 2005 Spotfacing can be seen when the original studs are removed. It struck me as a little odd when you said they didn't know what spotfacing is. Any machinist worth his chips knows this term. You may want to find another shop. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now