oddcomp Posted July 28, 2005 Share Posted July 28, 2005 i had it written down but lost the paper so does anyone know the flow rates for the ea82/ea82t injectors looks like the injectors in my spider intake are the same as my ea82t injectors Link to comment Share on other sites More sharing options...
Gravityman Posted August 3, 2005 Share Posted August 3, 2005 Well well well you might be in luck oddcomp. I just picked up a fuel pump from the junkyard from an xt6 that WORKS!&!#$*#. I tried one off of a xt turbo but no luck it was crap. Currently I have injectors for an XT6, XT4 turbo, 280zx 280zx turbo and a 240zx turbo. I am going to be building a flow bench this weekend to see what each of them run. If I can remember I have a full set for each of these cars so I am going to test them all hooked together each set at a time. I will pick up a set of EA82 injectors on friday so I can run those one my bench also. I FREAKEN CAN'T WAIT!!!!! I will be posting my findings on this Thread though sorry buddy. http://www.ultimatesubaru.org/forum/showthread.php?t=26375&page=5&pp=10 Oh ya Odd if you havent seen this I have fit the 280ZXT injectors in the XT6 fuel rail with minor modification. With no modification they should have no problems fitting a XT turbo, as far as a N/A EA82 I need to look at the fuel lines and see how they are setup. Link to comment Share on other sites More sharing options...
4WDFrenzy Posted August 4, 2005 Share Posted August 4, 2005 I'm not sure about the EA82(NA), but the EA82Ts have 180cc injectors. Link to comment Share on other sites More sharing options...
Gravityman Posted August 4, 2005 Share Posted August 4, 2005 I have to check but I could have swore that the ER27 and EA82T fuel plumbing was the same ie.. pump, injectors and such. I will let you guys know the difference I am going to be setting up the new flow bench and we will have confirmed numbers. Link to comment Share on other sites More sharing options...
oddcomp Posted August 4, 2005 Author Share Posted August 4, 2005 yeah my megasquirt setup is using the 180 cc numbers to base its fueling off of.. but i would like confirmed numbers.. Link to comment Share on other sites More sharing options...
Gravityman Posted August 4, 2005 Share Posted August 4, 2005 YO ODD post a picture of the injectors you have so I can compair them to what I have in my arsonal. Thanks buddy! Link to comment Share on other sites More sharing options...
NorthWet Posted August 4, 2005 Share Posted August 4, 2005 Oddcomp, check out this thread about having injectors cleaned and flowtested: http://www.ultimatesubaru.org/forum/showthread.php?t=35326 Later! Link to comment Share on other sites More sharing options...
Gravityman Posted August 7, 2005 Share Posted August 7, 2005 Check out the update!http://www.ultimatesubaru.org/forum/showthread.php?p=323160#post323160 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now