Frank B Posted July 29, 2005 Share Posted July 29, 2005 1989 GL-10 During my ongoing battle with the ever so common EA82T stumble, I decided to replace the fuel pump. I didn't want to pay $129.00 for a non-subaru replacement, so I looked into a Ford F series pickup transfer pump, the frame mounted one on many late 80's early 90's trucks. It provides 95PSI and 45 GPH but it was $119.00. I checked on the all mighty Ebay, and found a Ford pump for the Grand Marquis, Crown Victoria of the same years. It's a tank mounted pump but it is just like the Truck frame mounted booster pump, just smaller. Same specs too, 95PSI 45 GPH. I picked it up for $35.00 on Ebay. In stores its like $75.00 and up. Carter # P74025 AutoZone # E2182. The pump comes with two fittings, one 3/8" barb, and one 5/16" barb, but they are not 1/8" NPT as you may expect, they are metric. I believe it is 10-1.0 thread. It also comes with hose clamps, ring terminals to crimp onto the connector wires, and a strainer you will never use. It went into the stock bracket just fine with the rubber sleeve on the pump, I just had to keep it to one side so the output line wouldn't kink up. I used a foot of 5/16 fuel injection fuel line(high pressure) to make the turn. If I did it again, I would put a 90 degree fitting on the output side. I also had to trim about an inch off of the big line from the tank since the pump is shifted to one side. The car runs fine, no stumble on the first drive after the install, we'll see if it stays that way. Oh yeah, make sure you use a pair of vice grips to crimp the fuel lines so you won't get a bath, I actually remembered that this time:banana: Link to comment Share on other sites More sharing options...
idosubaru Posted July 29, 2005 Share Posted July 29, 2005 nice hit frank. how was the wiring connector? was it a direct fit or did you have to cut and fit it? reminded me of an issue im' having with my aftermarket fuel pump. Link to comment Share on other sites More sharing options...
Frank B Posted July 29, 2005 Author Share Posted July 29, 2005 I just cut the wires off of the old pump, and crimped on new ring terminals that came with the Ford pump. Red to positive, black to negative, and used the original connectors. Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted July 29, 2005 Share Posted July 29, 2005 So did it solve your stumble problems? -Brian Link to comment Share on other sites More sharing options...
idosubaru Posted July 29, 2005 Share Posted July 29, 2005 "The car runs fine. No stumble....." Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted July 29, 2005 Share Posted July 29, 2005 oh -Brian Link to comment Share on other sites More sharing options...
JonOfScio Posted July 29, 2005 Share Posted July 29, 2005 Wow, that is really neat. Exciting even. With a good FPR, I think that's an awesome upgrade. Link to comment Share on other sites More sharing options...
critical_max Posted July 29, 2005 Share Posted July 29, 2005 I too have a mystery stumble. Hadn't considered the fuel pump. So many things "could" be replaced... thanks for the tip on the part, I will look out for it in the boneyards. Link to comment Share on other sites More sharing options...
jazzician Posted July 29, 2005 Share Posted July 29, 2005 By "stumble", do you mean periodic quick hesitations during acceleration? I have that with my 89 gl10 and we replaced the fuel pump and it stopped doing it for a bit but it is starting up again after a year or so. Link to comment Share on other sites More sharing options...
Frank B Posted July 29, 2005 Author Share Posted July 29, 2005 I too have a mystery stumble. Hadn't considered the fuel pump. So many things "could" be replaced... thanks for the tip on the part, I will look out for it in the boneyards. On these ford cars, it's in the tank, part of an assembly. I'll try to find out exactly what year and models and post the info. Link to comment Share on other sites More sharing options...
MorganM Posted July 29, 2005 Share Posted July 29, 2005 This info is already posted. Used to be in the USRM but it's gone now. Had full conversion info. It's a Ford fuel pump and you can get the one used for the F150 EFI early '90s. The one where it had an intake and an inline pump. You want the inline pump. http://www.ultimatesubaru.org/forum/showthread.php?t=26464&highlight=ford+fuel+pump http://www.ultimatesubaru.org/forum/showthread.php?t=12875&highlight=ford+fuel+pump Link to comment Share on other sites More sharing options...
cd45 Posted July 29, 2005 Share Posted July 29, 2005 I just got another one from O'rielly's. It has a lifetime warranty. It fits the original bracket, just like the factory model. I only paid $25 for it. Link to comment Share on other sites More sharing options...
Dylan86GL10 Posted February 6, 2006 Share Posted February 6, 2006 I just got another one from O'rielly's. It has a lifetime warranty. It fits the original bracket, just like the factory model. I only paid $25 for it. What year and model did you ask for? 1 Link to comment Share on other sites More sharing options...
Caboobaroo Posted August 6, 2006 Share Posted August 6, 2006 yes, I'd like to know too. Is there a difference for the engine sizes on the Fords or are all of them going to have the same pump? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now