ejmoore Posted August 6, 2005 Share Posted August 6, 2005 The little rubber pad that goes over the clutch top ('96 Legacy Outback Wagon) slips something awful. I replaced it thinking that it was the older pad (that one had a small tear in the top left corner) but this one slips just as badly. I tried Gorilla Glue but it didn't do the trick (and made a sticky mess - too hot outdoors right now). Any suggestions to keep this pad in place, besides duct tape??? The top of the clutch mechanism is so slick, and the pad moves when I shift, then makes a weird ploppop when I release the clutch. It's not affecting the car, it's just damned annoying. Link to comment Share on other sites More sharing options...
felipe01forester Posted August 7, 2005 Share Posted August 7, 2005 Take it to the shop and see what they say. It may just be a small adjustment. Link to comment Share on other sites More sharing options...
mattocs Posted August 7, 2005 Share Posted August 7, 2005 the rubber pad on my clutch and brake pedal came off...but the metal pedal has plenty of grip, as most the shoes I wear have rubber bottoms. Glue some sandpaper to it...that'll help prevent slipping. Link to comment Share on other sites More sharing options...
Subie Gal Posted August 7, 2005 Share Posted August 7, 2005 replace it with wrx pads Link to comment Share on other sites More sharing options...
ejmoore Posted August 7, 2005 Author Share Posted August 7, 2005 Thank all. Your suggestions gave me the idea to use an adhesive stair tread, or a bathtub tread, under the pad. I'll also check out those WRX pads. Namaste, ej Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now