SLudwig Posted August 8, 2005 Share Posted August 8, 2005 When it gets cold (used to be just winter cold, now its even cool mornings in the summer!), the drivers side shoulder belt won't come up. After driving awhile it comes up like its supposed to. Every once in awhile a real hard door slam will activate it. I figure its a bad connector or relay somewhere, but don't know where to look. The microswitches in the belt channel both seem to be fine. Thanks, Scott Link to comment Share on other sites More sharing options...
Legacy777 Posted August 9, 2005 Share Posted August 9, 2005 I'm assuming you have a 90-94 legacy. Here's the diagnostic procedure to pull codes from the computer. It may be of use http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag1.jpg http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag2.jpg http://www.main.experiencetherave.com:8080/subaru_manual_scans/FSM_Scans/autoseatbeltdiag3.jpg Link to comment Share on other sites More sharing options...
SLudwig Posted August 9, 2005 Author Share Posted August 9, 2005 Thanks Josh ... I hope this helps me figure it out. Link to comment Share on other sites More sharing options...
Legacy777 Posted August 9, 2005 Share Posted August 9, 2005 welcome Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now