Vanislru Posted August 16, 2005 Share Posted August 16, 2005 I'm trying to stuff a pb 4wd 5pd trannie into a twagon I have. Can I run 2 wires from the connector coming from stick shift to the 2 vac. sol.'s under the hood. I've got 4wd light sorted out, I just need to figure out how to actuate the sol.'s Link to comment Share on other sites More sharing options...
calebz Posted August 17, 2005 Share Posted August 17, 2005 Should be 3 wires on the stick for the pushbutton. 1 power in, 2 power out. Those run to the hot side of the solenoids, then just ground the black wires off the solenoids and you're good to go. Link to comment Share on other sites More sharing options...
Vanislru Posted August 17, 2005 Author Share Posted August 17, 2005 thanks! I searched but couldn't confirm this. Link to comment Share on other sites More sharing options...
bhamxt Posted August 17, 2005 Share Posted August 17, 2005 in a sort of related question, my 4wd light doesn't go on when I hit the button, it's not the fuse, have a digi dash, any ideas, thanks Link to comment Share on other sites More sharing options...
MilesFox Posted August 17, 2005 Share Posted August 17, 2005 look up iluvdirt as he wired up the mechanism for a pushbutton 5spd using 2 toggle switches, for lack of a dp/dt switch Link to comment Share on other sites More sharing options...
mudduck Posted August 21, 2005 Share Posted August 21, 2005 Just wondering, but can the pushbotton be converted to a lever shift? I haven't had any problems with mine engaging, but I just don't like pushing a bottun to engage the 4wd. Link to comment Share on other sites More sharing options...
TurboSPFI Posted August 21, 2005 Share Posted August 21, 2005 lever shift for a single range? you might as well just get a d/r Link to comment Share on other sites More sharing options...
mudduck Posted August 21, 2005 Share Posted August 21, 2005 I would have to find a d/r tranny around here, which is easier said than done in this neck of the woods, and I can't afford to have one shiped. Link to comment Share on other sites More sharing options...
WoodsWagon Posted August 22, 2005 Share Posted August 22, 2005 A cable shift setup would be easiest, thats what the vacuum actuator moves to shift the tranny. take a look under the car, the actuator is on the left of the tranny with a cable leading to the right of the tranny. Link to comment Share on other sites More sharing options...
TurboSPFI Posted August 22, 2005 Share Posted August 22, 2005 Oh yeah I forgot, they're everywhere here. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now