NewSuby Posted August 18, 2005 Share Posted August 18, 2005 I just purchased my 95 Suby this last week (95 Impreza) and I am noticing a shimmy and shake when I apply the breaks at speeds greater than 40MPH...If I'm just driving around town I don't notice, but at speeds greater than 50MPH I definitely notice this shaking...Any ideas I was told that the brakes were done about 8 months ago. Link to comment Share on other sites More sharing options...
Cougar Posted August 18, 2005 Share Posted August 18, 2005 I would check the brakes. Particularly the front ones. One side may be grabbing better than than the other side. It would be good to check the front end also for a problem. Link to comment Share on other sites More sharing options...
WAWalker Posted August 18, 2005 Share Posted August 18, 2005 Brake rotors are warped. Either the rotors were not resurfaced when brake job was done. Or they were machined below min. thikness. Or the pads are not good quality. Or any combination of the above. Link to comment Share on other sites More sharing options...
drquasievil Posted August 18, 2005 Share Posted August 18, 2005 I second that. I have a 95 Legacy. Rotors needed to be resurfaced due to the problem you are describing. WAWalker said: Brake rotors are warped. Either the rotors were not resurfaced when brake job was done. Or they were machined below min. thikness. Or the pads are not good quality. Or any combination of the above. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now