soobscript Posted August 19, 2005 Share Posted August 19, 2005 When is someone from the board going to start making these? Link to comment Share on other sites More sharing options...
samo Posted August 20, 2005 Share Posted August 20, 2005 Why don't you? Fiberglass is pretty easy to work with. Link to comment Share on other sites More sharing options...
Steveman09 Posted August 20, 2005 Share Posted August 20, 2005 Like this? It's made by Autometer and Summit Racing stocks it It's for a CRX. Link to comment Share on other sites More sharing options...
nkx Posted August 20, 2005 Share Posted August 20, 2005 apparently coke cans are just the right size to hold gauges. either use them, or use them as a mold kinda thing to form the fiberglass around, and then go from there. gauges custom mounted anywhere youd like! Link to comment Share on other sites More sharing options...
calebz Posted August 20, 2005 Share Posted August 20, 2005 Made by OBX. For a CRX. less than $10 shipped on ebay Link to comment Share on other sites More sharing options...
Caboobaroo Posted August 21, 2005 Share Posted August 21, 2005 I modified a 3 gauge a-pillar pod for a '02 WRX to fit into my RX. Was pretty easy actually since all I needed was a hacksaw and about 30 minutes of time for test fitting and whatnot. I cut some off and used a file to make it look nice and then I mounted it... http://community.webshots.com/photo/302403464/389939708mtzKpQ Link to comment Share on other sites More sharing options...
subaru_styles Posted August 22, 2005 Share Posted August 22, 2005 autometer single for a gen 1 impreza..yeah i know, the interior is a mess right now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now