Shifter59 Posted August 21, 2005 Share Posted August 21, 2005 Came home last night and got off the freeway, clutch stuck to the floor for a minute, i had to pry it up with my foot. After that it would not let me shift into gears, I had to force it into the gears to get home the last few miles. I'm pretty sure the clutch went out, but dont want to replace the entire thing if it's just part of the clutch, any suggestions? Anyone in the Vancouver/Portland area that can help me? Where to go for repairs? Thanks-David Link to comment Share on other sites More sharing options...
mattocs Posted August 21, 2005 Share Posted August 21, 2005 Is it slipping when in gear? I've never seen a clutch just stick to the floor. How old is the clutch? (how many miles are on it) Link to comment Share on other sites More sharing options...
felipe01forester Posted August 21, 2005 Share Posted August 21, 2005 It could be the clutch master cylinder. Subaru clutches are hydraulic. Look under the hood to the left of the brake booster (while you're facing the front of the car) and you'll see a small reservoir. Check the level. If it's low, it can be topped off with standard brake fluid. Link to comment Share on other sites More sharing options...
Shifter59 Posted August 21, 2005 Author Share Posted August 21, 2005 It doesn't slip , once i get it into gear, it seems the problem today after looking at it more is that the clutch is maybe only half engaging? I'm not sure, It's just almost impossible to get it into gear, I really hope it's not tranny problems, by the way the car has 157,000miles on it........ Is it slipping when in gear? I've never seen a clutch just stick to the floor. How old is the clutch? (how many miles are on it) Link to comment Share on other sites More sharing options...
sea#3 Posted August 21, 2005 Share Posted August 21, 2005 Came home last night and got off the freeway, clutch stuck to the floor for a minute, i had to pry it up with my foot. After that it would not let me shift into gears, I had to force it into the gears to get home the last few miles. I'm pretty sure the clutch went out, but dont want to replace the entire thing if it's just part of the clutch, any suggestions? Anyone in the Vancouver/Portland area that can help me? Where to go for repairs? Thanks-David Try this link http://endwrench.com/main.php?smPID=PHP::article_detail.php&&RECID=327 It's a technical service bulletin SEA#3 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now