DerFahrer Posted September 20, 2003 Share Posted September 20, 2003 Would the strut assemblies from a 86 GL wagon fit my 88 XT GL?? Front and rear? I might have found a donor car to swap my air suspension out, so please help! TIA... Link to comment Share on other sites More sharing options...
archemitis Posted September 20, 2003 Share Posted September 20, 2003 they will fit, but i dont know what they would do for ride height Link to comment Share on other sites More sharing options...
DerFahrer Posted September 20, 2003 Author Share Posted September 20, 2003 Okay, I can get the car really cheap, so the worst case scenario is I could always cut the springs... Link to comment Share on other sites More sharing options...
TROGDOR! Posted September 20, 2003 Share Posted September 20, 2003 I'd suggest using 2WD sedan/coupe/XT components. I know that the rear shocks are longer on ALL wagons, and I tried using 4WD struts on the front of my XT and the strut assembly itself was longer. Was a royal pain in the butt to put in, and the car looked really silly sitting high. Your air suspension works, doesnt it? Up here we say, if it ain't broke, don't fix it. Link to comment Share on other sites More sharing options...
gravelRX Posted September 20, 2003 Share Posted September 20, 2003 I swapped the reg struts from a XT6 to an Rx and it dropped the nose 2 1/2 inches. So from that I would venture to guess the opposite would apply to what your trying to do. ? ?Don't know about the rear. Jay Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now