Hocrest Posted September 2, 2005 Share Posted September 2, 2005 I uses a piece of angle steel from Lowes. Did some trimming and some drilling and mounted across between the two top mounting points for the headreasts. Attached to this crossbar are a couple of Rhode Gear Pro, Truck Shuttle Bike Mounts that I got off of EBay for about $10 each. The headrests will still go up and down with the cross bar in place, but I would have to unscrew the Bike Mount. On the Crosspost you can see another hole in the middle for a third Bike Mount, but I'm pretty sure that would be too close together for the bike handlebars. Quote Link to comment Share on other sites More sharing options...
subieman Posted September 2, 2005 Share Posted September 2, 2005 Looks good! Wish I thought of that when I had my brat. Quote Link to comment Share on other sites More sharing options...
Bucky92 Posted September 2, 2005 Share Posted September 2, 2005 Hey Dave...cool idea and mod! Becca sure does look pretty too!! Quote Link to comment Share on other sites More sharing options...
moosens Posted September 2, 2005 Share Posted September 2, 2005 Nice job! Quote Link to comment Share on other sites More sharing options...
WRCGVR4 Posted September 5, 2005 Share Posted September 5, 2005 Very clean! Have you considered making a few of these for profit? Quote Link to comment Share on other sites More sharing options...
YellowSub Posted September 5, 2005 Share Posted September 5, 2005 That look's awesome. Great job Quote Link to comment Share on other sites More sharing options...
YellowSub Posted September 5, 2005 Share Posted September 5, 2005 If only one mount was installed between the headrest, would that cause any interference? Quote Link to comment Share on other sites More sharing options...
soobmater Posted September 5, 2005 Share Posted September 5, 2005 haha thats cool. i like it Quote Link to comment Share on other sites More sharing options...
Hocrest Posted September 7, 2005 Author Share Posted September 7, 2005 If only one mount was installed between the headrest, would that cause any interference? With just one in the middle I think both headrests would work normally, but a jump seat passenger may knock their noggin' if the trail gets bumpy. The nice thing about these Rhode Gear mounts is that they can be removed by unscrewing the large yellow knob. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.