EA82Turbo Posted September 12, 2005 Share Posted September 12, 2005 Hi, I have an 1982 leone 5 speed manual 23 count splines. I have read about people swaping the inside gearing in a Leone RXII LSD to maintain correct ratio and using them in this model of leone. I have found a Legacy LSD, could the same be done with this? Thankx Hayden Link to comment Share on other sites More sharing options...
chef_tim Posted September 12, 2005 Share Posted September 12, 2005 The Leg LSD is a Vicous (sp?) LSD and I believe 3.9 (mine was any ways) It will bolt right in. Great on snowy/icy roads, not so great for off road. PS, I just noticed where you are located. You'd have to check the ratios to be sure they're the same. Tim Link to comment Share on other sites More sharing options...
Turbone Posted September 12, 2005 Share Posted September 12, 2005 Definatly check the tag on the diff, I think it might be 4.11. Link to comment Share on other sites More sharing options...
carfreak85 Posted September 12, 2005 Share Posted September 12, 2005 If its from a turbo legacy, I'm pretty sure its a 3.900 ratio. I have no idea about the international cars however... Link to comment Share on other sites More sharing options...
EA82Turbo Posted September 13, 2005 Author Share Posted September 13, 2005 I beleive my old school leone is 3.7 ratio. is this correct? Can I change crown and pinon in legacy LSD to maintain 3.7 ratio??? Link to comment Share on other sites More sharing options...
EA82Turbo Posted September 13, 2005 Author Share Posted September 13, 2005 Also, what about the stub axles they will have the wrong spline count. My spline count is 23 and I think the legacy is 25. Can I change the stub axles? how is this done? Link to comment Share on other sites More sharing options...
Dr. RX Posted September 14, 2005 Share Posted September 14, 2005 I ran a USDM Turbo Legacy VLSD (3.90) in my 86 GL-10 Turbo Sedan for years. I also have a 3.90 D/R tranny in the car. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now