WJM Posted September 21, 2005 Share Posted September 21, 2005 Any ideas on longer wheel studs for the older subies? Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted September 21, 2005 Share Posted September 21, 2005 Chef Tim found some. He used them on EA81 but im positive EA82 hubs are the same. -Brian Link to comment Share on other sites More sharing options...
ShawnW Posted September 21, 2005 Share Posted September 21, 2005 Napa and custom wheel shops have lots of them if youre willing to change hole diameter or thread type. Link to comment Share on other sites More sharing options...
Snowman Posted September 21, 2005 Share Posted September 21, 2005 Go to the parts store and see what they can come up with that will fit into the hubs? There surely is some vehicle with studs that are similar but longer. Link to comment Share on other sites More sharing options...
WJM Posted September 21, 2005 Author Share Posted September 21, 2005 Napa and custom wheel shops have lots of them if youre willing to change hole diameter or thread type. No need. We have found 60MM studs...that are COMMON....as common as....as any other SUBARU and Nissan out there. reason i ask before i post answer...to see if anyone has done the proper research. Think...these 'old cars' are not so 'old'........... Link to comment Share on other sites More sharing options...
nkx Posted September 21, 2005 Share Posted September 21, 2005 legacy studs? impreza studs? Link to comment Share on other sites More sharing options...
TROGDOR! Posted September 22, 2005 Share Posted September 22, 2005 So, what are they? Link to comment Share on other sites More sharing options...
torxxx Posted September 22, 2005 Share Posted September 22, 2005 Yeah I'd like to know what the studs are for. I'm going to need longer studs so I can have an offset plate made for the hubs. I wanna go 1/2" offset to make sure my tires dont rub with the lift Link to comment Share on other sites More sharing options...
WJM Posted September 22, 2005 Author Share Posted September 22, 2005 Im only going to give one hint...as its classified and *I* dont have the say so to release the info.... They are COMMON and READILY AVALIBLE. Link to comment Share on other sites More sharing options...
TROGDOR! Posted September 22, 2005 Share Posted September 22, 2005 Hmmm, then I suppose one of us with some free time needs to go to the junkyard with a Subaru lugnut and stud in hand and start checkingJapanese cars, starting with Subaru, then Nissan, and on out from there. Link to comment Share on other sites More sharing options...
JWX Posted September 22, 2005 Share Posted September 22, 2005 only subaru and nissan use the M12x1.25 thread, that I have found atleast. if you search it will come to you (google be your friends) Link to comment Share on other sites More sharing options...
chef_tim Posted September 22, 2005 Share Posted September 22, 2005 http://www.ultimatesubaru.org/forum/showthread.php?t=31721&highlight=stud Oh Yeah, I have them on an EA 81 and 82 car. Tim Link to comment Share on other sites More sharing options...
dave valiant Posted September 22, 2005 Share Posted September 22, 2005 Thanks Tim. After I do my engine swap I will be getting these studs and nuts and running the pugs Link to comment Share on other sites More sharing options...
WJM Posted September 22, 2005 Author Share Posted September 22, 2005 http://www.ultimatesubaru.org/forum/showthread.php?t=31721&highlight=stud Oh Yeah, I have them on an EA 81 and 82 car. Tim Nope...the ones we have do not require special-ness....such as a 'press' :-p Link to comment Share on other sites More sharing options...
chef_tim Posted September 22, 2005 Share Posted September 22, 2005 Why the big secret:confused: Help a few brothers out:D Tim Link to comment Share on other sites More sharing options...
WJM Posted September 22, 2005 Author Share Posted September 22, 2005 I would...but....things like this get posted on her and answered and then a week later some one posts the Q again and no one has a clue. Plus its up to the discover'r to reveal the info...not I. Link to comment Share on other sites More sharing options...
JWX Posted September 23, 2005 Share Posted September 23, 2005 honestly just go look for them. its really that easy. Link to comment Share on other sites More sharing options...
critical_max Posted September 23, 2005 Share Posted September 23, 2005 M12x1.25 for Nissan, Subaru, and Suzuki McGard lockable wheel nuts - 24154SU Locking wheel nut set by McGard. Suitable for Nissan, Datsun, Subaru, Suzuki. ray's engineering lug nuts M12x1.25 for "most japanese cars" (other than the big H) http://www.rxecret7.com/raenlugnu.html Looks like all Nissans share it? JWX was right, it was a dead simple google Link to comment Share on other sites More sharing options...
WJM Posted September 23, 2005 Author Share Posted September 23, 2005 There is one more...and its also a big brand name....but its a 'nissan brand' and 'jdm' Link to comment Share on other sites More sharing options...
Handtool Posted September 23, 2005 Share Posted September 23, 2005 Nismo Link to comment Share on other sites More sharing options...
nkx Posted October 11, 2006 Share Posted October 11, 2006 old thread bump. do we know the length of the oem wheel studs?? Link to comment Share on other sites More sharing options...
Phizinza Posted October 11, 2006 Share Posted October 11, 2006 just as a guess around 40mm Link to comment Share on other sites More sharing options...
Kostamojen Posted July 23, 2010 Share Posted July 23, 2010 Bumping this to try and get some expert advise from the 80's folks... I need longer studs for my front FF-1 hubs. The stud turns out to be the SAME as the 80's studs, here is a pic: The length of the Impreza studs would actually work OK, I only need 1-1.5cm longer studs to work with my spacers. However I know about the NISMO studs (which are 50mm or 60mm) and ARP studs, but all of those appear to be geared for Impreza/Legacy style studs. Has anyone used Impreza style studs on their 80's Brats/Loyales/etc. even though their stock stud looks like my FF-1 stud? Link to comment Share on other sites More sharing options...
ShawnW Posted July 24, 2010 Share Posted July 24, 2010 I did and the acorn lug nut ended up having a hole thru the end but otherwise it worked ok. This was with a stock alloy wheel 13" thru a brake drum on the rear of my 84 Brat. Still a little peeved at WJM for this thread. I see his point but honestly a factory Subaru part works fine if you need longer studs. I have a feeling a stamped steel wheel might not fair as well as it would sit further down on the stud. Link to comment Share on other sites More sharing options...
Kostamojen Posted July 24, 2010 Share Posted July 24, 2010 I did and the acorn lug nut ended up having a hole thru the end but otherwise it worked ok. What do you mean? You mean the open-ended lugnuts? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now