tailgatewagon Posted September 21, 2005 Share Posted September 21, 2005 Ok so ive been thinking (seams like this came up once before on the old board) but i want to know what bulbs fit in the quad light gen 1's i measured them they look to be 5.5in all i can find is 5.75 or 5's i would like to put a real bright bulb in my high beams to use for rallying. and night driving.(as some of these roads you wont see another person for 100miles in teh day much less at night) i also seam to remeber somone puting yellow bulbs in one spot (from bmw??) anyway any ideas...... Link to comment Share on other sites More sharing options...
Snowman Posted September 21, 2005 Share Posted September 21, 2005 Would it be possible to just mount some KCs or something in the holes where the stock lights go? Link to comment Share on other sites More sharing options...
tailgatewagon Posted September 21, 2005 Author Share Posted September 21, 2005 most KC lights are 7 or 8 in. they have one that is 6.8..... you can try hella.com to see there stuff, and kclights.com http://www.kchilites.com/store/5-Black-HIDbrLong-Range-System-461-P420C35.aspx these would be sweet but a little expensive.... Link to comment Share on other sites More sharing options...
Zefy Posted September 21, 2005 Share Posted September 21, 2005 i've been toying with the idea of BMW lights... they used quad round headlights for many many years... and they seem bright... my uncles are pretty darn good... i took a quick measurement but i think they will fit... Link to comment Share on other sites More sharing options...
operose Posted September 21, 2005 Share Posted September 21, 2005 i've been toying with the idea of BMW lights... they used quad round headlights for many many years... and they seem bright... my uncles are pretty darn good... i took a quick measurement but i think they will fit... some guy over on the legacycentral board put bmw lights in his 1st gen legacy.. I thought it was ugly, but i figured I'd let you know Link to comment Share on other sites More sharing options...
Ross Posted September 21, 2005 Share Posted September 21, 2005 You can get non-sealed beam (like H4 or something) replacements for most (if not all) sealed beam lights. Not too expensive either. Then you can go to like, 120W per bulb. You want the number on the front of the light, ill look at the quads on my 79 later if you want. Link to comment Share on other sites More sharing options...
eyesore Posted September 22, 2005 Share Posted September 22, 2005 You can get the proper size housings from JC Whitney for an H-4 headlight conversion. I did this to Eyesore, and am now able to run Sylvania Silverstar H-4 bulbs. The whole deal cost about $75. BIG difference. If you wanted to lay out big $$, you can even do a H.I.D. conversion. For Rallying, and extreme rural areas (like I was in,) I reccommend the H-4 conversion and KC's in concert. (BTW, I've found the $20each Walmart-special 6" spots to work/last quite well. I see no need to spend Hella, KC kind of $$ on lights. My .02) Link to comment Share on other sites More sharing options...
Rattle wagon Posted September 22, 2005 Share Posted September 22, 2005 HELLA has H-4's for the outside and H-1's for the inside about 50.00 a peice also a 4-lamp wiring harness with relays from A.P.C also 50.00 I have this set up on my 79' wagon and its very bright! Link to comment Share on other sites More sharing options...
tailgatewagon Posted September 22, 2005 Author Share Posted September 22, 2005 could you post the part numbers of what you used in your hella convershion that would be great... anyway thanks... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now