WJM Posted September 25, 2005 Share Posted September 25, 2005 Air/Water installed. It rocks. hot air in............COLD air out! Link to comment Share on other sites More sharing options...
JWX Posted September 25, 2005 Share Posted September 25, 2005 go get one now TTIWWODP Link to comment Share on other sites More sharing options...
WJM Posted September 25, 2005 Author Share Posted September 25, 2005 tittey woooOOOOOp? tomorrow damnit. PLUS...you saw it 20 mins ago....slacker. Link to comment Share on other sites More sharing options...
nkx Posted September 25, 2005 Share Posted September 25, 2005 This Thread Is Worthless WithOut Da Proof? Link to comment Share on other sites More sharing options...
jeffast Posted September 25, 2005 Share Posted September 25, 2005 what is going on here arrgghh proof proof Link to comment Share on other sites More sharing options...
JWX Posted September 25, 2005 Share Posted September 25, 2005 TehThreadIsWorthlessWithOutDynoPlot Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted September 25, 2005 Share Posted September 25, 2005 Get us some pix. Im getting a AWIC from a friend and will like to install it. I wanna see how you connected the turbo to the intlet. -Brian Link to comment Share on other sites More sharing options...
WJM Posted September 25, 2005 Author Share Posted September 25, 2005 hahahahaahah *puts camera in car* Link to comment Share on other sites More sharing options...
subyrally Posted September 25, 2005 Share Posted September 25, 2005 pics would be dandy. so would some dyno results. cant wait to see your setup will. Link to comment Share on other sites More sharing options...
WJM Posted September 25, 2005 Author Share Posted September 25, 2005 Link to comment Share on other sites More sharing options...
Do It Sidewayz Posted September 25, 2005 Share Posted September 25, 2005 looks cool.. Celica Alltrac Intercooler eh?? Seems i've got one of those attached to the car in the driveway. Curious why you mounted it like that. you've got a PILE of intake tubing there. If it was me..put the inlet at the back, and run the outlet straight in and down into the throttle body. The Inlet could then just snake up, around, and into the inlet side of the I/C. Link to comment Share on other sites More sharing options...
WJM Posted September 25, 2005 Author Share Posted September 25, 2005 i just lego'd it together with what I had layoung around. Link to comment Share on other sites More sharing options...
Do It Sidewayz Posted September 25, 2005 Share Posted September 25, 2005 Fair enough. we'll just call this what?? Water to Air Intercooler Evo #1? Link to comment Share on other sites More sharing options...
WJM Posted September 25, 2005 Author Share Posted September 25, 2005 Version 0.5...lol Link to comment Share on other sites More sharing options...
tizzle Posted September 25, 2005 Share Posted September 25, 2005 Cool! Going to do this to mine someday.! Link to comment Share on other sites More sharing options...
BoostedBalls Posted September 26, 2005 Share Posted September 26, 2005 Looks awesome but I think you will like the shifting performance better if you moved the BOV to the pipe that is mounted to the top of the throttlebody. (downstream of the intercooler) As is, the boosted air has to stop and turn around in your intercooler and head the other way when the BOV opens, then go back towards the throttlebody when the throttle opens up again. I did testing on this with my setup and it made a noticable difference. kick rump roast Link to comment Share on other sites More sharing options...
oddcomp Posted September 26, 2005 Share Posted September 26, 2005 i know something that wjm isn't telling nya nya Link to comment Share on other sites More sharing options...
Do It Sidewayz Posted September 26, 2005 Share Posted September 26, 2005 correct. the BOV/BPV valve placement is best when right next to the Throttle body. leads to much better throttle response Link to comment Share on other sites More sharing options...
WJM Posted September 26, 2005 Author Share Posted September 26, 2005 well...i realize all that....BUT..that DSM pipe was a perfect fit right there, so im not going to change it until i find real time to fab up proper piping and such. Verision 2 will likely feature one of these cores: Or a Spearco or PWR WRX-STi AWIC core...*IF* i can find the spearco one used again on ebay...otherwise the PWR is going to cost some serious $$$$ oddcomp.....what? Link to comment Share on other sites More sharing options...
nkx Posted September 26, 2005 Share Posted September 26, 2005 it looks like your engine bay got in one of those fear factor dares that involve a glass box and a bunch of snakes Link to comment Share on other sites More sharing options...
kingbobdole Posted September 26, 2005 Share Posted September 26, 2005 Sooo.... Hey where you do you get that black mesh stuff? Does it work well? Also, oddcomppp.... are what you are seeing... does it have to do with fueling? peace Link to comment Share on other sites More sharing options...
WJM Posted September 28, 2005 Author Share Posted September 28, 2005 its mistsubishi EVO IC hose. Its not the greatest, but its OE so its designed to last. Works ok for my stuff right now. 20+ PSI=NO on that stuff tho. and HOLY crap does it pull on the interstate. dyno'd it... not a single HP gain. ALL TQ! 30 TQ gain. will post graph tomorrow. Link to comment Share on other sites More sharing options...
tizzle Posted September 28, 2005 Share Posted September 28, 2005 whoa! awesome. Link to comment Share on other sites More sharing options...
oddcomp Posted September 28, 2005 Share Posted September 28, 2005 hey wjm i am running diesel sillicone radiator hose on my setup its like a dollar per inch tho or something like that and i am pretty sure it will hold 20+psi after all how much psi do you suppose a kenworth's cooling system develops ?? Link to comment Share on other sites More sharing options...
Myxalplyx Posted September 30, 2005 Share Posted September 30, 2005 its mistsubishi EVO IC hose. Its not the greatest, but its OE so its designed to last. Works ok for my stuff right now. 20+ PSI=NO on that stuff tho. and HOLY crap does it pull on the interstate. dyno'd it... not a single HP gain. ALL TQ! 30 TQ gain. will post graph tomorrow. Very Very interesting Will. I would not be surprised if that gain is on the low end. I'll take a stab and say it is just before and just after 3000rpm. Am I right? **Crossing Fingers*** Oh yeah, I got the version 2 you want in my garage. I took this pic last week. Muhahahaha! Now where are those Dyno charts damn it! I hate waiting for those things. I'm a dyno chart junkie. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now