WJM Posted September 26, 2005 Share Posted September 26, 2005 Finally, I have one... We solded the harness up tonight, and we got it to idle. Next step is tomorrow night, at the shop we will instll the IAT sensor, and tune it on the dyno. HUGE thanks to http://www.diyautotune.com/ for the hardware and soldering services! Link to comment Share on other sites More sharing options...
JWX Posted September 26, 2005 Share Posted September 26, 2005 cheater Link to comment Share on other sites More sharing options...
subyrally Posted September 26, 2005 Share Posted September 26, 2005 what unit did you get? Link to comment Share on other sites More sharing options...
WJM Posted September 26, 2005 Author Share Posted September 26, 2005 The latest and greatest ofcourse. Link to comment Share on other sites More sharing options...
jeffast Posted September 26, 2005 Share Posted September 26, 2005 i've been looking at mega squirt how hard was it to install? also KICK@$$ Link to comment Share on other sites More sharing options...
WJM Posted September 26, 2005 Author Share Posted September 26, 2005 its NOT plug any play....yet. Plug and play kits will be avalible for Leone's soon....exclusively thru WJM Rallye Sport. This is the experimental/prototype unit. WJM Link to comment Share on other sites More sharing options...
subyrally Posted September 26, 2005 Share Posted September 26, 2005 its NOT plug any play....yet. Plug and play kits will be avalible for Leone's soon....exclusively thru WJM Rallye Sport. This is the experimental/prototype unit. WJM any idea of what the pricing will be?? that will be hot Link to comment Share on other sites More sharing options...
WJM Posted September 26, 2005 Author Share Posted September 26, 2005 about.....alot. Lets just say...more than $400, and less than $800. My kits might include a wideband setup for autotune, so that will adda bout $200 onto the cost. Link to comment Share on other sites More sharing options...
Guest shadow Posted September 26, 2005 Share Posted September 26, 2005 Whenever I bring my kits to market, I'll be sure to sharply undercut WJM here! Good job on getting it running, now get it tuned! Link to comment Share on other sites More sharing options...
jeffast Posted September 26, 2005 Share Posted September 26, 2005 nm i'm stupid Link to comment Share on other sites More sharing options...
oddcomp Posted September 26, 2005 Share Posted September 26, 2005 nice. Link to comment Share on other sites More sharing options...
subyrally Posted September 26, 2005 Share Posted September 26, 2005 about.....alot. Lets just say...more than $400, and less than $800. My kits might include a wideband setup for autotune, so that will adda bout $200 onto the cost. will that be including the ms box or is that just the adaptor kit? Link to comment Share on other sites More sharing options...
WJM Posted September 26, 2005 Author Share Posted September 26, 2005 It will be the complete kit....remove stock ECU, plug up the MS, tune and have fun. Whenever I bring my kits to market, I'll be sure to sharply undercut WJM here! Good job on getting it running, now get it tuned! ha...ha...ha.... at this rate i dont think WJM Rallye Sport is going to get off the ground for quite a while...all Leones world wide might rust away. LOL Link to comment Share on other sites More sharing options...
WJM Posted October 6, 2005 Author Share Posted October 6, 2005 Tonight we played some more with it....it is currently idling like OE...which means steady ~1000 RPM idle...no missing. Just smooth idle. Next...more idle and crank-start tuning...then off to the dyno to tune. Link to comment Share on other sites More sharing options...
Snowman Posted October 6, 2005 Share Posted October 6, 2005 That is so sweet. If I ever build up an EA82T, this is going to be high on my list. Link to comment Share on other sites More sharing options...
WJM Posted October 9, 2005 Author Share Posted October 9, 2005 Ok, so we are up to 113/133 as compared to stock 106/129.... still lots more to do. and YES...the MS is in, and working perfectly. Link to comment Share on other sites More sharing options...
WJM Posted October 9, 2005 Author Share Posted October 9, 2005 well, 116hp/140tq are the semi-final numbers. thats 10hp and 6tq increase. Off boost power is a ton better...and butt dyno on the street says its really around 20hp/15tq increase. A lot left to do.....throttle enrichment during driving is way off....its got a weird timing stumble between 2000 and 3000...and MS-2 doesnt feature knock system monitoring or control at all...that's got me stopped on tuning. the 12x12 table....lacks....fine resolution. I could not get the AFR's smooth...but they are better...no more pig rich....mostly 10.5~11.5 in boost. tried to get 14.7 everywhere else...but it smooths from 14.7 to 12 when comming into boost...then from 12 to the sweet spot range for boost. Timing is...set...to...alot. I need knock system stuff damnit! Link to comment Share on other sites More sharing options...
oddcomp Posted October 9, 2005 Share Posted October 9, 2005 where are my fuel maps bish?!?!?!? lol certainly worth the hassle of making it work huh pay attention and you should notice the turbo coming in a little to alot sooner especially if you add a a little extra fuel in the 90-100 kpa range you want a copy of my timing maps? to see if that helps ? they are pretty much tuned by ear and feel and engine temp but seem to work fine for me for now until i get rich and can play on a dyno maybe i can con some dyno place up in pdx in giving me a break for it being such a one off setup lol Link to comment Share on other sites More sharing options...
joostvdw Posted February 13, 2006 Share Posted February 13, 2006 Maybe one of you guys running MS2 could write-up what is needed to install it on a ea82t? Like all the connections and hickups you've obviously solved. Would be great for future users of MS2 thanks in advance Link to comment Share on other sites More sharing options...
Dylan86GL10 Posted February 27, 2006 Share Posted February 27, 2006 What spark trigger are you using? Distributor or EDIS? Link to comment Share on other sites More sharing options...
WJM Posted February 28, 2006 Author Share Posted February 28, 2006 the stock Disty...and usisng it to disty the spark. Or...was...since there's an EJ22E going in now.. Link to comment Share on other sites More sharing options...
Dylan86GL10 Posted February 28, 2006 Share Posted February 28, 2006 the stock Disty...and usisng it to disty the spark. Or...was...since there's an EJ22E going in now.. Thanks, that was my plan for now. Link to comment Share on other sites More sharing options...
idosubaru Posted March 1, 2006 Share Posted March 1, 2006 dylan, are you installing MS on your EA82T? you're going to have MS and EDIS? have you started yet? Link to comment Share on other sites More sharing options...
Dylan86GL10 Posted March 1, 2006 Share Posted March 1, 2006 dylan, are you installing MS on your EA82T? you're going to have MS and EDIS? have you started yet? Gary, I have a spare MSnS'e that I built a couple years ago. One is on my Neon but I haven't mounted or wired the spare on the wagon yet. I don't know if I'm going EDIS or distributor. As I have the 86 distributor I don't know how I'm going to address the constant spark signal. I'm still pretty new to subaru but I believe the 86 turbo distributor still has mechanical advance and not computer controlled (separate knock box). I could pin the advance so the signal out of the distributor is always at TDC. Getting the EDIS parts doesn't bother me but then I still need to machine and mount the crank wheel. Actually this weekend, there is the big MegaSquirt get together in Virginia Beach with the designers and folks from all over the country. We are meeting up at a dyno shop Saturday and Sunday. There should be details here: http://www.msefi.com/viewtopic.php?p=104803&highlight=#104803 Link to comment Share on other sites More sharing options...
idosubaru Posted March 1, 2006 Share Posted March 1, 2006 sweet, nice. i'd like to do this to the XT Turbo once it's up and running. is this set-up reliable? or constant maintenance? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now