aee Posted October 4, 2005 Share Posted October 4, 2005 Where is the best place to buy a clutch disc & alignment tool for 1992 legacy. Thanks aee Link to comment Share on other sites More sharing options...
TheBrian Posted October 4, 2005 Share Posted October 4, 2005 Not AutoZone. And ask who makes the part. If it's Fenco, pass. Fenco = Crap. I may have saved $100 by getting a cheap clutch kit, but now I have clutch chatter, and I'm 90% sure I have a bad throwout bearing. If I had it to do over again, I'd mail-order an OE clutch kit, or maybe get a Beck-Arnley from Advance or NAPA or someplace. Link to comment Share on other sites More sharing options...
aee Posted October 4, 2005 Author Share Posted October 4, 2005 Not AutoZone. And ask who makes the part. If it's Fenco, pass. Fenco = Crap. I may have saved $100 by getting a cheap clutch kit, but now I have clutch chatter, and I'm 90% sure I have a bad throwout bearing. If I had it to do over again, I'd mail-order an OE clutch kit, or maybe get a Beck-Arnley from Advance or NAPA or someplace. How about Pep Boys they have a kit for about 200.00. I ordered a cluch disc from Courtesy Subaru Parts onlt to get an e-mail that the rpice quoted me was wrong because of different part numbers and the kicked it up another 20%. I'll check out the other sources you mentioned. Thanks Link to comment Share on other sites More sharing options...
TheBrian Posted October 4, 2005 Share Posted October 4, 2005 PepBoy's clutches are by Motormite. Much of Motormite's stuff is pretty cheap. (I work part time at AutoZone.) This deal is hard to beat: http://www.teaguesauto.com/parts1.htm Link to comment Share on other sites More sharing options...
Al_SemC Posted October 4, 2005 Share Posted October 4, 2005 I've found that cheaping out on clutch parts will come back to haunt you. My last car got two new clutches over the course of 10k because I figured I could save some by buying a cheap AutoZone (Fenco) clutch. It developed serious chatter because the pressure plate warped. No, I didn't flog it. It was an Escort; there wasn't any point. That said, I'd check out Boxer4Racing -- they carry OEM clutches and, last I heard, charged about 3-hunge for them. Also, depending on what motor you are attaching this to, you could look at RalliSpec and see about getting a stiffer clutch, assuming you like quicker, more logrithmic takeup. Do note, though, that chatter is really a fact of life with Subaru clutches, especially sportier ones. Incidentally, you can help that a bit with better engine mounts, tranny mount and pitching stopper. Link to comment Share on other sites More sharing options...
jib Posted October 4, 2005 Share Posted October 4, 2005 I've been very happy with www.clutchmasters.com. I've used their clutches on two different cars. Jack Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now