99BL Posted October 4, 2005 Share Posted October 4, 2005 Just aquired a 99 Legacy, my first Subaru while looking under the dash for the fuse panel I noticed a single wire above the gas pedal that has a green plug on both ends. This wire is unplugged , seperating the wire. I conected the plug and started the car, the check engine light flashed continuously. So I unplugged the wire. My Q is, should this wire be left un plugged or is it normally conected? Link to comment Share on other sites More sharing options...
Al_SemC Posted October 4, 2005 Share Posted October 4, 2005 That wire has something to do with the diagnosic mode for the engine computer. It's supposed to be disconnected. Why it hangs down like that is beyond me. I'd tape/ziptie it up out of the way. Link to comment Share on other sites More sharing options...
nipper Posted October 4, 2005 Share Posted October 4, 2005 Alot of cars with puter have this. It bypasses something in the puter so the mechnaic can help to troubleshoot, but for the life of me i cant remember what it does. Not all wires under the dash are meant to be pluged in nipper Link to comment Share on other sites More sharing options...
BigMattyD Posted October 4, 2005 Share Posted October 4, 2005 Yes, you need to leave that disconnected for normal driving, it is only connected when doing certain diagnostics. Legacy 777 has written a lot about it. matt Link to comment Share on other sites More sharing options...
Lawsonmh15 Posted October 5, 2005 Share Posted October 5, 2005 Ahh yes... The good old diagnostic connector. Just leave it unplugged. I think ALL diligent folks here with later models have stumbled across this. Link to comment Share on other sites More sharing options...
99BL Posted October 6, 2005 Author Share Posted October 6, 2005 Hey, thanks all for replying. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now