centrino Posted October 5, 2005 Share Posted October 5, 2005 Did you know if the "buttons-symbols" that are marken in green have light at night? Link to comment Share on other sites More sharing options...
Handtool Posted October 5, 2005 Share Posted October 5, 2005 Yes they should. It is a fairly common problem. Let me find a link for you. Here you go: http://scoobymods.com/forums/showthread.php?t=91 Link to comment Share on other sites More sharing options...
centrino Posted October 7, 2005 Author Share Posted October 7, 2005 Thanks!!! Link to comment Share on other sites More sharing options...
hklaine Posted October 7, 2005 Share Posted October 7, 2005 No cupholder? And a clock in the HeadUnit area? I am curious to see the rest of your interior. Quite different from USDM. -Heikki Link to comment Share on other sites More sharing options...
nipper Posted October 7, 2005 Share Posted October 7, 2005 hehe yes can we see some more pics? nipper Link to comment Share on other sites More sharing options...
centrino Posted December 3, 2005 Author Share Posted December 3, 2005 Sorry, don´t see your answers... when i can i will put some photo of the interior, yes, don´t have the cup holder in spain in this models... i need one... Link to comment Share on other sites More sharing options...
mattocs Posted December 4, 2005 Share Posted December 4, 2005 Sorry, don´t see your answers... when i can i will put some photo of the interior, yes, don´t have the cup holder in spain in this models... i need one... It's better not to have one than to have the one in the US models. It is junk, and you'll end up buying a few replacment radios. Link to comment Share on other sites More sharing options...
Phugoid Posted December 4, 2005 Share Posted December 4, 2005 Why is this such a common problem? My 97 OBW has this exact same thing plus the hazard light too. It seems that it's so concentrated, and so common...bad grounds or a short somewhere? I think I'm going to order the parts and give this a try. Seems simple and low risk. Reid Link to comment Share on other sites More sharing options...
Commuter Posted December 4, 2005 Share Posted December 4, 2005 Why is this such a common problem? My 97 OBW has this exact same thing plus the hazard light too. It seems that it's so concentrated, and so common...bad grounds or a short somewhere? I think I'm going to order the parts and give this a try. Seems simple and low risk. Reid Why? Who knows. One of those Subaru quirks. Someone missed somewhere on the specification of these bulbs it would seem. You can also try this link. Lots of info. I put the RadioShack bulbs in the last time. They've gone over 3 years. The OEM bulbs (twice replaced) lasted half of that for me. Commuter Link to comment Share on other sites More sharing options...
Gnuman Posted December 4, 2005 Share Posted December 4, 2005 OK, what is the part # for the RS bulbs, please. . . Looks like I an going to need to refit my switches. . . the backlight keeps failing. I pull the switch loose, wiggle it a bit and it goes back on for a while. . .Grrrrr. I hate loose connections. Oh, and the reason the 95 and up climate control lights fail is that the green covers hold in the heat so the bulb gets hotter and burns out faster. . . Link to comment Share on other sites More sharing options...
nipper Posted December 4, 2005 Share Posted December 4, 2005 Its called accountant enigineering. Cheap bulbs. (my theory). The radio shack bulbs are far superior and last a lot longer, and are far more inexpensive then subaru (if they will even sell them to you). nipper Link to comment Share on other sites More sharing options...
Commuter Posted December 4, 2005 Share Posted December 4, 2005 OK, what is the part # for the RS bulbs, please. . . 7219. There is another "part no." on the pkg... some 6 digit no. I believe. I think you will find it in that lengthy "Climate Control Backlight" thread, if needed. They are 12V bulbs, 60 mA. I'm sure the friendly sales people can help you. Commuter Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now