Jump to content
Ultimate Subaru Message Board

an assortment of annoying anomalies from an associate's auto


Recommended Posts

My friend Sasha's car (1995 Legacy, 2.2, 5MT) is having intermittent episodes of poor performance. She has had the codes read and cleared twice, and they were the same both times:

 

PO115 Coolant Temperature Sensor

PO120 Throttle Position Sensor

PO325 Knock Sensor #1 Malfunction

PO125 Insufficient Temp Forced Loop

PO133 O2 Signal Slow Banks #1 Sensor #1

(P1200 or P1700 - Mechanic has bad handwriting) Signal to TCM Circuit

 

She has had the battery and alternator checked, per my initial advice. I am going to look at the groundwires and the alternator's wiring harness later this week. I don't know if we should suspect the computer, but I am not inclined to suspect the actual sensors named by the codes. I would appreciate any advice.

Link to comment
Share on other sites

Just out of curisoty, when was the last time the O2 sensors were serviced?

The care computer has an open loop and a closed loop. Open loop is when you first start the car. Untill all the opertaing parts and seinors get all to thier happy temperitures, the car is running off a fixed program. Once the car warms up, it goes into a closed loop. This is where the car is reading all the sensors and everything has reached its operating temps.

The three things that can screw this up are, a bad coolant temp sensor, a bad o2 sensor, and maybe a bad tps. I dont think a bad TPS would throw it into a forced loop. so i would check out the other two first.

With a good manual and a ohm meter, all three can be tested.

 

nipper

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...