RX will hopefully be off out of the garage shortly...

[Caboobaroo]

So I have a complete turbo spyder intake coming to me, a new Megan catless downpipe coming, and then I have a few odd-n-ends to take care of like timing and then...

 

We'll be pullin out of the garage under its own power! Once I get the spyder intake setup on, I can then mount my intercooler, finish the plumbing from the turbo to the IC, put some new coolant hoses in for the turbo, new gaskets for the exhaust, mount the new downpipe, reconnect my O2 sensor, finish up some of the vacuum hoses for the EBC and make sure my timing is in line (it didn't want to start last time due to a timing issue). Then I have to bleed the brakes, finish up the front and rear XT6 swaybars, get an alignment, get new axles, and hopefully I can get it titled and licensed. It seems like a lot for one person to handle but because I'm stoked to hear it run again, I'm gonna make it happen as soon as I get the parts. Then maybe if I feel like it, install my cams I have that are already in cam towers with new seals. I'm excited!

[WJM]

So does that mean my parts are on the way to me?

[Caboobaroo]

yup, parts will be coming shortly.

 

I just got the old intake off, one rear quarter window ready to be installed, and the radiator out so I can start pulling the front end of the motor back apart to install the Delta cams and to reset the timing since I must have done it wrong somewhere. Then it will be to ordering the TWE header and getting the turbo mounted back down with new gaskets. After that, te downpipe will be installed which will be here Friday, install the new intake which should be here next week, install the IC, work the plumbing for the turbo, reconnect everything and hopefully see if I can't get her to fire up.

 

Oh I hope, I hope I can get her to run... its only been a year in December since she went under the knife.