bella Posted October 13, 2005 Share Posted October 13, 2005 Things are like this: My mechanic is leaving for good in Australia and.....I don't now anybody to clean my carb(I live in Bucharest – 2.000.000 peoples:banghead:) which is foul since I run out of gasoline. Now I use LPG and my car is working but winter will come and engine must be start first time on gasoline and after that switched on LPG.:banghead: So, how bad could I damage my carb if I open it and clean it by myself? Is so hard to do that?? Can you guys give me advices on how I should proceed? I understand that most dangerous is that under the lid it has some spring assembly and is a risk to loose them..... Any other dangerous things???? Thank you allot and you are my last hope. Link to comment Share on other sites More sharing options...
PeterD Posted October 13, 2005 Share Posted October 13, 2005 i took a hitachi carb apart... not completely ( i kept the linkage together ) and i put new stuff inside, cleaned it up and it worked great. Link to comment Share on other sites More sharing options...
soobme Posted October 13, 2005 Share Posted October 13, 2005 Not so hard. Just look at everything VERY good (take pictures if you need to) so you can put it all back together the same way it came apart. Any screws that you turn, count how many times you turn them so you can put them back the way they wer. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now