Subarubiflu Posted October 14, 2005 Share Posted October 14, 2005 I have an ER27 that I have all apart. but I can't seem to divorce the block to get to the crank. Is their a trick or do I need a big f-ing hammer? I'm a bit nervous about pounding on an aluminium block. Any one have advise? Link to comment Share on other sites More sharing options...
nipper Posted October 14, 2005 Share Posted October 14, 2005 Use a rubber mallet and pull.nipper Link to comment Share on other sites More sharing options...
Gravityman Posted October 14, 2005 Share Posted October 14, 2005 AWSOME I had the same problem!!! Look in the oil ports there are 2 hiding inside very very sneaky!!! Once you get them out the engine will fall apart! It took me about almost a month of PURE FRUSTRATION AND ANGER to get it apart. The one day I looked at all the pictures I took while taking the engine apart and I saw the bolts in the pic. I ran frantically to the engine in the frigid cold and POOF there they where stairing me in the face. Made myself feel like a dumb rump roast! Make sure you use a rubber mallet or a piece of wood ie 2x4 and tap it with a hammer. Should be easy. My related thread http://www.ultimatesubaru.org/forum/showthread.php?t=29359 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now